« previous next »
Pages: [1]   Go Down

Author Topic: I just finished making my first Eagle part - the SHT31-DIS temp./humid. sensor  (Read 2569 times)

0 Members and 1 Guest are viewing this topic.

Offline thomasb9511Topic starter

  • Contributor
  • Posts: 34
  • Country: us
I just finished making my first Eagle part - the SHT31-DIS temp./humid. sensor
« on: April 18, 2016, 01:37:38 am »
I am pretty sure I got the layout right but could I get a once over for the dimensions and the like?
The datasheet: https://cdn-shop.adafruit.com/product-files/2857/Sensirion_Humidity_SHT3x_Datasheet_digital-767294.pdf
Logged
 

Offline Fortran

  • Regular Contributor
  • *
  • Posts: 206
  • Country: fi
Re: I just finished making my first Eagle part - the SHT31-DIS temp./humid. sensor
« Reply #1 on: April 18, 2016, 05:11:26 am »
Dimensions seems fine.  :-+
Although your silkscreen lines are way too thin to be visible.
Minimum is probably 6mil.
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee