Hi All,
All the library tutorials I've seen cover the case where the whole of device is used in one location on a schematic. i.e. the schematic symbol has all of the pins on it.
What I want to do is create a part for a 6x Schmitt trigger inverter. So the schematic will have six inverters and two power pins which I want to split up and place around my schematic
Does anyone have any hints and tips on how to do this?
On a related note, I'm having a play around with existing parts that are like this. e.g. a 4001 quad NAND gate. When I place it on the schematic the NAND gates place one at a time, appearing as IC1A then IC1B, C, D etc then IC2A etc. How do I get the power pins to appear on the schematic?
Many thanks in advance!