« previous next »
Pages: [1]   Go Down

Author Topic: orcad 16.6  (Read 2413 times)

0 Members and 1 Guest are viewing this topic.

Offline ant17Topic starter

  • Regular Contributor
  • *
  • Posts: 95
orcad 16.6
« on: April 02, 2016, 03:27:47 am »
hi guys i was hoping someone might be able to help me i am having trouble with orcad and netlist error one of the components is generating this error (ORCAP-36050): No pins are present in U3 which is a tip2955 transistor with a to247ac.psm footprint can anybody help
Logged
 

Offline nctnico

  • Super Contributor
  • ***
  • Posts: 26906
  • Country: nl
    • NCT Developments
Re: orcad 16.6
« Reply #1 on: April 02, 2016, 10:27:07 am »
Sounds vaguely familiar: did you create pins on the symbol?
Logged
There are small lies, big lies and then there is what is on the screen of your oscilloscope.
 

Offline rfbroadband

  • Supporter
  • ****
  • Posts: 186
  • Country: us
Re: orcad 16.6
« Reply #2 on: April 03, 2016, 04:52:03 am »
please post screen shot of the schematic, including output log
Logged
 

Offline ant17Topic starter

  • Regular Contributor
  • *
  • Posts: 95
Re: orcad 16.6
« Reply #3 on: April 03, 2016, 11:39:30 pm »
sorry people i have fixed the problem i was using the wrong symbol and footprint and thinking it was talking the component that was not the issue thanks for your input
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee