Author Topic: pcb-rnd, Gentoo overlay (sci-electronics/pcb-rnd)  (Read 5505 times)

0 Members and 1 Guest are viewing this topic.

Offline legacyTopic starter

  • Super Contributor
  • ***
  • !
  • Posts: 4415
  • Country: ch
pcb-rnd, Gentoo overlay (sci-electronics/pcb-rnd)
« on: February 18, 2019, 08:04:17 pm »
version 2.1.1

Elisabeth and I have just created an ebuild (rev C), it has been tested on { ppc, hppa }, and it requires these two patches

besides, it requires these use flags, in /etc/portage/package.use/eda
Code: [Select]
sci-electronics/gerbv     doc examples -static-libs unit-mm
sci-electronics/pcb-rnd   -cairo gtk motif -opengl xrender gcode gerber

The installed programs will come with two GUIs: gtk and openmotif!
If you want opengl hardware support, you need to enable the opengl flag.

edit:
We (at DTB) are not affiliated with Gentoo, but we are unofficial supporters for non-x86 machines.
« Last Edit: February 19, 2019, 05:24:33 pm by legacy »
 

Offline legacyTopic starter

  • Super Contributor
  • ***
  • !
  • Posts: 4415
  • Country: ch
Re: pcb-rnd, Gentoo overlay
« Reply #1 on: February 18, 2019, 08:30:18 pm »
We will try to support future versions of pcb-rnd as soon as released.
 

Offline ScribblesOnNapkins

  • Regular Contributor
  • *
  • Posts: 111
Re: pcb-rnd, Gentoo overlay
« Reply #2 on: February 19, 2019, 05:31:06 am »
Wow. Thank you for doing this!

Thanks also from our project leader Igor2.
 

Offline legacyTopic starter

  • Super Contributor
  • ***
  • !
  • Posts: 4415
  • Country: ch
Re: pcb-rnd, Gentoo overlay (sci-electronics/pcb-rnd)
« Reply #3 on: February 19, 2019, 05:16:05 pm »
we have just enhanced a bit the ebuild (rev E) and added a userflag table.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf