Electronics

No New Posts Beginners

A place for electronics newbies to ask questions. Include detail & what you have already done to find the answer. Short "How does X work" questions are not proper forum etiquette. Assignment questions are ok, but show existing work.

224615 Posts
19372 Topics

Last post by imo
in Re: High voltage linear ...
on Today at 09:09:08 pm

No New Posts Projects, Designs, and Technical Stuff

Show off your projects or other stuff you are working on. Talk about designs or ideas, ask technical questions, and share technical information. This is the big catch-all thread for anything electronic.

223217 Posts
17894 Topics

Last post by odessa
in Re: anyone knows a dista...
on Today at 09:14:02 pm

No New Posts Repair

Ask for repair help or describe how to repair equipment

71563 Posts
6762 Topics

Last post by The_PCB_Guy
in Re: Repairing a GW Inste...
on Today at 08:45:31 pm

No New Posts Microcontrollers & FPGAs

PIC, AVR, MSP430, ARM, Propeller, Renesas, Arduino, PICAXE, whatever. If it's about Microcontroller hardware or software, or programable logic like FPGA/PLDs, post it here.

83830 Posts
5169 Topics

Last post by RoGeorge
in Re: Software design book...
on Today at 07:54:32 pm

No New Posts RF, Microwave, HAM Radio

RF, Microwave, and HAM Radio designs, projects, and discussions.

13405 Posts
1315 Topics

Last post by EVS
in Re: Diy Noise Source up ...
on Today at 08:37:36 pm

No New Posts Metrology

Everything metrology & Calibration related. This is where the Voltnuts hang out.

27618 Posts
951 Topics

Last post by alanambrose
in Re: Relay / fet matrices...
on Today at 09:00:58 pm

No New Posts Renewable Energy

Renewable Energy: Solar, wind, thermal, nuclear, energy storage, Electric Vehicles etc.

6820 Posts
268 Topics

Last post by cdev
in Re: Energy saving street...
on Today at 08:56:36 am

No New Posts Open Source Hardware

A community section to discuss Open Source Hardware (OSHW) projects or anything OSHW related. If the project is not licensed under the OSHW scheme, please put it in the regular Projects & Technical section.

4453 Posts
268 Topics

Last post by cdev
in Re: The problem I have w...
on August 12, 2018, 09:45:21 am

No New Posts Manufacturing & Assembly

Discuss getting your PCB or product manufactured or assembled. Home brew PCB's, Pick & Place machines, reflow etc.

15851 Posts
933 Topics

Last post by mrpackethead
in Re: Solder Paste expirat...
on Today at 08:22:00 pm

No New Posts Crowd Funded Projects

The best place on the internet to discuss crowd funded hardware projects! Is a campaign too good to be true? Is it technically possible? Promote your crowd funded project here, just be ready for serious expert feedback.

18075 Posts
837 Topics

Last post by KL27x
in Re: Vion : The Worlds Si...
on Today at 10:28:24 am

No New Posts General PCB/EDA/CAD Discussions

If it doesn't fit into the other categories, put it here. General layout, library, footprint, and design questions etc

30085 Posts
3003 Topics

Last post by NANDBlog
in Re: Importing Orcad BRD ...
on Today at 08:08:00 pm

Child Boards: KiCad, DIPtrace, Circuit Studio, Eagle, Altium Designer, DesignSpark, Proteus, gEDA

Products

No New Posts Test Equipment

Test Equipment reviews, teardowns, discussion, questions etc. This is the biggest T&M forum on the net, so your product has likely already been discussed, please use the Search function in the menu above first!

257272 Posts
12174 Topics

Last post by Specmaster
in Re: [EDIT]Hard dilemma: ...
on Today at 08:50:02 pm

No New Posts Thermal Imaging

Everything to do with thermal imaging and cameras

22763 Posts
580 Topics

Last post by Bill W
in Re: Thermal camera teard...
on Yesterday at 10:53:17 pm

No New Posts Other Equipment & Products

Product reviews, teardowns, and discussion about any gear that's NOT test equipment related. Tools, gadgets etc.

54385 Posts
3897 Topics

Last post by KL27x
in Re: Low cost ( chinese )...
on Today at 09:17:17 pm

No New Posts Vintage Computing

Vintage Computers and related projects

3196 Posts
167 Topics

Last post by georgeretro
in Re: Apple Lisa Keyboard ...
on Today at 11:10:57 am

General

No New Posts General Chat

This is where everyone hangs out and rants and chats about whatever electronics topics that don't fit into the other more specific categories on this forum. Occasional off-topic stuff is ok, but generally we like to keep it electronics related.

310018 Posts
15708 Topics

Last post by RoGeorge
in FOSS Android 4.2.2 audio...
on Today at 08:52:05 pm

No New Posts Dodgy Technology

Discuss all dodgy sounding products, technology, and marketing here. Snake oil, Audiophoolery, Free Energy, outright scams, or just marketing-wank products that don't have a chance of meeting their specs, this is the place to discuss and debunk them.

3102 Posts
94 Topics

Last post by Mr. Scram
in Re: Nexus 5x - Nexus nev...
on Today at 09:14:49 pm

No New Posts Jobs

An industry jobs board. Post your job ad here. Commercial companies are welcome provided they don't spam and run, you must stick around & contribute. No HR droids or recruitment companies.

1402 Posts
179 Topics

Last post by julianhigginson
in Re: Wanted: someone to c...
on August 03, 2018, 07:37:37 am

No New Posts Work Wanted

Looking for contract or regular work? Post your work wanted ad here listing your skills and what you have to offer. Resumes attachments (PDF) are allowed if you want to make them public. Companies NOT allowed.

320 Posts
80 Topics

Last post by criznach
in 20+ year software guru l...
on August 09, 2018, 01:58:39 am

No New Posts Buy/Sell/Wanted

List your electronics related stuff for sale, or link to others. Wanted ads go here too. Only dealers who are valued contributors to the forum community are welcome to post here.

43122 Posts
6683 Topics

Last post by Aurelio
in Re: [FS] HP3457a Bench M...
on Today at 04:35:31 pm

No New Posts Contests & Events

All time sensitive things like contests, events, seminars, webinars, meetups, exhibitions, promotions, courses, etc.

8951 Posts
186 Topics

Last post by Halcyon
in Re: 2nd EEVblog meetup!
on Yesterday at 06:20:30 pm

EEVblog

No New Posts Supporters Lounge

A private board for supporters of and major contributors to the blog. CLICK HERE to subscribe.

5412 Posts
199 Topics

Last post by Protected
in Protected
on August 12, 2018, 05:03:30 pm

No New Posts EEVblog Specific

Chat relating to specific EEVblog episodes or content.

88534 Posts
2753 Topics

Last post by Pete F
in Re: EEVBlogAcademy
on Today at 09:00:38 pm

Child Boards: EEVdiscover, EEVblab, Suggestions, News
No New Posts Other Blog Specific

Got your own blog?, or want to post someone else's blog and talk about it? You can do that here.

3448 Posts
425 Topics

Last post by @rt
in Break from YouTube
on August 12, 2018, 04:57:25 pm

No New Posts The AmpHour Radio Show

Talk about the Dave Jones & Chris Gammell electronics podcast show.

2259 Posts
243 Topics

Last post by Peabody
in Re: #401 – An Interview ...
on August 07, 2018, 12:04:50 am

  • No New Posts
  • Redirect Board

EEVblog Electronics Community Forum - Info Center

Recent Posts Recent Posts

Topic: Poster: Board: Post Time:
Re: Nexus 5x - Nexus never again. Mr. Scram Dodgy Technology Today at 09:14:49 pm
Re: anyone knows a distance sensor (steps 0,2mm) with digital protocol interface ? odessa Projects, Designs, and Technical Stuff Today at 09:14:02 pm
Re: High voltage linear regulators. imo Beginners Today at 09:09:08 pm
Re: Low cost ( chinese ) Plasma Cutter / TIG welder Combo suggestions? SparkyFX Other Equipment & Products Today at 09:05:08 pm
Re: High frequency capacitor selection imo Beginners Today at 09:03:21 pm
Re: Relay / fet matrices for low current / voltage switching? alanambrose Metrology Today at 09:00:58 pm
Re: EEVBlogAcademy Pete F EEVblog Specific Today at 09:00:38 pm
Re: Low cost ( chinese ) Plasma Cutter / TIG welder Combo suggestions? mrpackethead Other Equipment & Products Today at 08:58:01 pm
FOSS Android 4.2.2 audio player with speed control and position memory RoGeorge General Chat Today at 08:52:05 pm
Re: [EDIT]Hard dilemma: GW121 or Brymen BM867s? Specmaster Test Equipment Today at 08:50:02 pm
Re: Low cost ( chinese ) Plasma Cutter / TIG welder Combo suggestions? BradC Other Equipment & Products Today at 08:49:15 pm
Re: High voltage linear regulators. Wolfgang Beginners Today at 08:48:42 pm
Re: Precision voltage controlled current source? alanambrose Metrology Today at 08:48:40 pm
Re: anyone knows a distance sensor (steps 0,2mm) with digital protocol interface ? AndyC_772 Projects, Designs, and Technical Stuff Today at 08:48:15 pm
Re: Repairing a GW Instek Triple Channel Power Supply that Struggles to Turn On The_PCB_Guy Repair Today at 08:45:31 pm
Re: High frequency capacitor selection Alex Nikitin Beginners Today at 08:44:09 pm
Re: Tariff Watch helius General Chat Today at 08:42:03 pm
Re: Low cost ( chinese ) Plasma Cutter / TIG welder Combo suggestions? KL27x Other Equipment & Products Today at 08:41:05 pm
Re: Help me chose my first oscilloscope Fungus Test Equipment Today at 08:40:35 pm
Re: High frequency capacitor selection imo Beginners Today at 08:40:23 pm
Re: HP 34401a DMM with leaking segments qu1ck Repair Today at 08:39:03 pm
Re: anyone knows a distance sensor (steps 0,2mm) with digital protocol interface ? StillTrying Projects, Designs, and Technical Stuff Today at 08:37:45 pm
Re: Diy Noise Source up to 3GHz EVS RF, Microwave, HAM Radio Today at 08:37:36 pm
Re: Wire and trees and me Chris Wilson RF, Microwave, HAM Radio Today at 08:30:48 pm
Re: FeelTech FY6600 60MHz 2-Ch VCO Function Arbitrary Waveform Signal Generator bugi Test Equipment Today at 08:29:01 pm
Re: Wideband amp wanted for a noise generator to feed my SA Chris Wilson RF, Microwave, HAM Radio Today at 08:27:02 pm
Re: $20 LCR ESR Transistor checker project madires Test Equipment Today at 08:23:44 pm
Re: US Currency Credit Card for non US Residents mrpackethead General Chat Today at 08:23:44 pm
Re: Solder Paste expiration and optimising hand soldering SMT mrpackethead Manufacturing & Assembly Today at 08:22:00 pm
Re: Low cost ( chinese ) Plasma Cutter / TIG welder Combo suggestions? BradC Other Equipment & Products Today at 08:21:18 pm
Re: Low cost ( chinese ) Plasma Cutter / TIG welder Combo suggestions? tautech Other Equipment & Products Today at 08:21:10 pm
Re: High frequency capacitor selection ZeroResistance Beginners Today at 08:21:00 pm
Re: Siglent SDS2000X or SDS1000xxx (Blackfin) hacks? bugi Test Equipment Today at 08:20:16 pm
Re: High voltage linear regulators. sureshot Beginners Today at 08:20:15 pm
Re: Precision voltage controlled current source? zucca Metrology Today at 08:18:18 pm
Re: Low cost ( chinese ) Plasma Cutter / TIG welder Combo suggestions? mrpackethead Other Equipment & Products Today at 08:17:02 pm
Re: GPS Disciplined Clock for Arduino imo Projects, Designs, and Technical Stuff Today at 08:15:53 pm
Re: Slow MOSFET turn off StillTrying Projects, Designs, and Technical Stuff Today at 08:15:17 pm
Re: Test Equipment Anonymous (TEA) group therapy thread bd139 Test Equipment Today at 08:14:09 pm
Re: Solder Paste expiration and optimising hand soldering SMT KL27x Manufacturing & Assembly Today at 08:12:34 pm
Re: Looking for a Low Cost Way of Measuring DC-DC Converter Control Loop Response mzzj Test Equipment Today at 08:12:06 pm
Re: Where to buy an isolation transformer ? RoGeorge Beginners Today at 08:11:52 pm
Re: Importing Orcad BRD file to Altium NANDBlog General PCB/EDA/CAD Discussions Today at 08:08:00 pm
Re: What's this please? (Component Advice) VinzC General Chat Today at 08:07:20 pm
Re: Nexus 5x - Nexus never again. Kjelt Dodgy Technology Today at 08:04:37 pm
Re: High frequency capacitor selection helius Beginners Today at 08:02:12 pm
Re: High frequency capacitor selection ZeroResistance Beginners Today at 07:58:33 pm
Re: Low cost ( chinese ) Plasma Cutter / TIG welder Combo suggestions? KL27x Other Equipment & Products Today at 07:58:18 pm
Re: Where to buy an isolation transformer ? Kjelt Beginners Today at 07:55:05 pm
Re: Software design book recommendations RoGeorge Microcontrollers & FPGAs Today at 07:54:32 pm

Forum Stats Forum Stats

1523716 Posts in 100140 Topics by 42168 Members. Latest Member: electrohead
Latest Post: "Re: Low cost ( chinese )..." ( Today at 09:17:17 pm )
View the most recent posts on the forum.
[More Stats]

Users Online Users Online

1770 Guests, 237 Users (2 Hidden)

Users active in past 60 minutes:
analogRF, bleckers, Heffa, FredTW, Brumby, KL27x, GreyWoolfe, SvanGool, analog1, Spike101, morris6, Finder, langwadt, i8thunder, spudboy488, radzeck, odessa, newex, SparkyFX, Jeroen3, Old Printer, Fungus, chickenHeadKnob, jsole, mzzj, darrylp, zucca, oudevolvo, markce, Mr. Scram, neo, Halcyon, imo, Platonas, tsman, indman, mrpackethead, a1right, nano, 2N3055, ebastler, krish2487, firewalker, jleg, Moshly, mycroft, tautech, Koen, Calm7, LukeB, dcac, Johnny10, exe, StillTrying, PA0PBZ, Nicecircuits, jopl, Thomas, sd, gmb42, crouvean, Wolfgang, qu1ck, nForce, a.ekholm, neil555, awallin, djadeski, xmo, digsys, muktupavels, stevelup, guido, HoracioDos, b_force, nixiefreqq, glarsson, eanayo, PTR_1275, analogo, ExodusEffects, a.v.woerkom@hccnet.nl, kcs, cowana, ogden, KWKolb, dr.diesel, NivagSwerdna, DJohn, DannyTheGhost, gavwhela, alanambrose, EVfreak, Pete F, Andy Watson, trevwhite, Nusa, Pinkus, sotos, Kosmic, Sudo_apt-get_install_yum, sarahMCML, jaromir, CCB, FireBird, msliva, wraper, splin, Synthtech, xaxaxa, CM800, georgeretro, electrohead, luiHS, Echo88, fonograph, BravoV, Alex Nikitin, Shred, rust_collector, ThomasDK, swingbyte1, legacy, old gregg, Pirapoense, daqq, SebC, RoGeorge, Mickster, krazatchu, Lion_Tamer, NickZA, mikeselectricstuff, ZeroResistance, john_chatzi, nemka, Specmaster, AndyC_772, IconicPCB, BradC, z01z, vealmike, Hero999, Geoff_S, sorin, mig_skyfighter, dzseki, ihsanxx, Kalvin, newbrain, med6753, The_PCB_Guy, Nx-1997, bobdagangster, DaneLaw, ansonbao, RazvanM6, Rerouter, dexters_lab, void_error, Philfreeze, richard.cs, denimdragon, syau, Berni, VinzC, helius, Homer J Simpson, Aodhan145, velik_kazakov, fonak, C, Ian.M, Poeoe, hitech95, kwass, IanJ, RFDUK, abraxa, yaromka, GBowes, GabYoung92, grizewald, n4in, hansblix, woodgeek, flash2b, Pressing multilayers Do I, NW27, Fraser, AF6LJ, timpattinson, ArcadeHack, Loboscope, LazyJack, mhwlng, nesham, samofab, careyer, Marco1971, Chris Wilson, carrascoso, silverdulcet, Steps, olewales, JPortici, SPRX, Netsniper, bugi, StjepanV, BetoSaba, Benta, Lee Leduc, pascal_sweden, medical-nerd, autko, rsjsouza, stigwurx, brumbarchris, Gary.M, Ash, illusive, bd139, aelbler, M4x, 4thDoctorWhoFan, Roboss, Messtechniker, SaKhan, sureshot, muthukural001, alexman9000, bopstar, tmbinc, Vgkid

Most Online Today: 2512. Most Online Ever: 6723 (October 23, 2014, 06:43:09 am)