Author Topic: Altium pcb service  (Read 1575 times)

0 Members and 1 Guest are viewing this topic.

Offline Ultra67

  • Contributor
  • Posts: 6
  • Country: fr
Altium pcb service
« on: July 28, 2017, 07:54:49 AM »
Good evening,

I need a PCB to be made in Altium in a short delay. Do you guys know any service that can make a PCB design, if one provides the footprints of all components and the schematics? I'm struggling with this PCB, I just discovered Altium...

Thanks a lot.
 

Online blueskull

  • Supporter
  • ****
  • Posts: 7787
  • Country: cn
  • Power Electronics PhD Candidate
Re: Altium pcb service
« Reply #1 on: July 28, 2017, 08:21:06 AM »
If the design is interesting I can do this for you for free, but I'm not available until Aug 3rd.
PM me if you're interested.
SIGSEGV is inevitable if you try to talk more than you know. If I say gibberish, keep in mind that my license plate is SIGSEGV.
 

Offline bug13

  • Contributor
  • Posts: 41
  • Country: nz
Re: Altium pcb service
« Reply #2 on: July 28, 2017, 09:25:12 AM »
I may be able to help, pm me. I may be able to do it over the weekend. It's winter here, can't go out anyway.
Zhuhua Wu
Electronic Engineering Student
 

Offline Aztlanpz

  • Contributor
  • Posts: 43
  • Country: us
Re: Altium pcb service
« Reply #3 on: July 28, 2017, 09:53:31 AM »
I can also do it and i can start today



 

Online Alex Eisenhut

  • Super Contributor
  • ***
  • Posts: 1651
  • Country: ca
  • If you can buy it for 4$ on eBay, why design it?
Re: Altium pcb service
« Reply #4 on: July 28, 2017, 10:42:02 AM »
How can anyone say if they're ready or not to "do" this PCB? How many components? Largest footprint? Densest pitch? Frequency range? Number of nets? Mechanical? Etc...

What if it turns out there's 6000 parts, 40Gbps optical transceivers and 2000 pin .5mm BGAs on both sides of the board, and that it has 15 power nets running several amps each, switching supplies everywhere, SDRAM buses, and it requires blind and buried vias on a 30 layer board?

You could spend a week just figuring out the correct way to break out one BGA!

A "short delay" for that could be 3 months.  8)
 

Offline T3sl4co1l

  • Super Contributor
  • ***
  • Posts: 9325
  • Country: us
  • Expert, Analog Electronics, PCB Layout, EMC
    • Seven Transistor Labs
Re: Altium pcb service
« Reply #5 on: July 28, 2017, 10:56:50 AM »
Also, if one provides the footprints but they're all wrong..... what then? :-//

DFM is another great service.  Though I probably don't have time right now, unfortunately.

Tim
Seven Transistor Labs, LLC
Electronic Design, from Concept to Layout.
Need engineering assistance? Drop me a message!
 

Offline evb149

  • Super Contributor
  • ***
  • Posts: 1575
  • Country: us
Re: Altium pcb service
« Reply #6 on: July 28, 2017, 12:40:43 PM »
https://www.pcblibraries.com/

has a part library creation service for parts that you specity.  That is one option to outsource library symbol / footprint creation.  I think there are other such services that make parts for Altium also.

Beside that though they have a tool (there is a free minimum capability version and a costly full capability version) which assists the creation of a good library footprint based upon the user entering the proper mechanical specifications and creation preferences.

Be careful to get the right version and workflow planned though  if you are using Circuit Studio, though, since it may not have quite the same options as Altium Designer but there is supposedly a way to do it that is documented on the element14 circuit studio forum / site / whatever somewhere.

As for the layout task it sounds like you have many volunteers so someone should be able to do it quickly and well.

 

Offline Ultra67

  • Contributor
  • Posts: 6
  • Country: fr
Re: Altium pcb service
« Reply #7 on: August 01, 2017, 11:35:26 PM »
Thank you for all your responses ! I'm still looking for someone as no one is responding  ;D The PCB is not really complicated, the only constraint is that there's 20A at some nets of the circuit !
 

Online Brumby

  • Supporter
  • ****
  • Posts: 5664
  • Country: au
Re: Altium pcb service
« Reply #8 on: August 02, 2017, 11:52:52 AM »
... the only constraint is that there's 20A at some nets of the circuit !

That could be fun.
 

Offline aditya_electron

  • Newbie
  • Posts: 1
  • Country: in
Re: Altium pcb service
« Reply #9 on: August 27, 2017, 09:39:20 PM »
Kindly send the details. We provide Electronics Design services.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf