Author Topic: Wanted : PCB design support person  (Read 2433 times)

0 Members and 1 Guest are viewing this topic.

Offline free_electron

  • Super Contributor
  • ***
  • Posts: 6908
  • Country: us
    • SiliconValleyGarage
Wanted : PCB design support person
« on: January 11, 2018, 05:01:27 am »
Candidate profile : anyone who has tinkered with circuits , drawn a few schematics and made a couple of boards. All we need is someone with a keen spirit, attention to detail  and eagerness to learn.
Show your boards you made.

You will build symbols and footprints according to specification. Occasionally you will design boards as well.
I provide training.

This is a full time job.
Palo Alto - California.

Send me your resume and pictures/pdf files of a few schematics and pcb layouts you made for a chance to work for one of the coolest companies out there.
Professional Electron Wrangler.
Any comments, or points of view expressed, are my own and not endorsed , induced or compensated by my employer(s).
 

Offline massivephoton

  • Contributor
  • Posts: 18
  • Country: br
Re: Wanted : PCB design support person
« Reply #1 on: January 11, 2018, 01:03:45 pm »
Would you mind pointing out which EDA software the company uses?

Regards.
- J'ai vu une maison de cent mille francs.
- Comme c'est joli!
 

Offline blueskull

  • Supporter
  • ****
  • Posts: 10040
  • Country: cn
  • Power Electronics Guy
Re: Wanted : PCB design support person
« Reply #2 on: January 11, 2018, 01:40:02 pm »
Do you sponsor H1B?
SIGSEGV is inevitable if you try to talk more than you know. If I say gibberish, keep in mind that my license plate is SIGSEGV.
 

Online mrpackethead

  • Super Contributor
  • ***
  • Posts: 1871
  • Country: nz
Re: Wanted : PCB design support person
« Reply #3 on: January 11, 2018, 03:18:22 pm »
So, after the 2nd week, when they go stir crazy from looknig at datasheets, whats next?  Unless you have some interesting work for them as well, this job would send someone loopy.
 

Offline free_electron

  • Super Contributor
  • ***
  • Posts: 6908
  • Country: us
    • SiliconValleyGarage
Re: Wanted : PCB design support person
« Reply #4 on: January 12, 2018, 02:26:04 am »
EDA tool is irrelevant. We use Altium but i don't expect you to know that. It is nice to know, but i will train you.

Professional Electron Wrangler.
Any comments, or points of view expressed, are my own and not endorsed , induced or compensated by my employer(s).
 

Offline massivephoton

  • Contributor
  • Posts: 18
  • Country: br
Re: Wanted : PCB design support person
« Reply #5 on: January 12, 2018, 04:53:55 am »
EDA tool is irrelevant. We use Altium but i don't expect you to know that. It is nice to know, but i will train you.
Thanks for the info. Just wanted to have an idea of what's being used out there.

Regards.
- J'ai vu une maison de cent mille francs.
- Comme c'est joli!
 

Offline pinkman

  • Regular Contributor
  • *
  • Posts: 50
Re: Wanted : PCB design support person
« Reply #6 on: January 21, 2018, 06:15:50 am »
You should offer this as an online/work from home position so that someone doesn't have to live in that pseudo-necropolis... How many bags of blood are they charging for a square foot of apartment space these days?  Do they also ask for your firstborn in down payment?  If you say that the president is good for the economy, are you immediately fired?  :-DD
 

Offline NorthGuy

  • Super Contributor
  • ***
  • Posts: 1058
  • Country: ca
Re: Wanted : PCB design support person
« Reply #7 on: January 27, 2018, 02:55:10 am »
Wouldn't it be more beneficial to automate footprint creation? I once needed to create footprints for many test sockets (for example a socket where you can plug in TQFP). They have a kind of complicated TH pattern and lots of pins. It took me 20 minutes to create a small program to generate a footprint.

 

Offline free_electron

  • Super Contributor
  • ***
  • Posts: 6908
  • Country: us
    • SiliconValleyGarage
Re: Wanted : PCB design support person
« Reply #8 on: January 30, 2018, 09:00:15 am »
Wouldn't it be more beneficial to automate footprint creation? I once needed to create footprints for many test sockets (for example a socket where you can plug in TQFP). They have a kind of complicated TH pattern and lots of pins. It took me 20 minutes to create a small program to generate a footprint.
For stuff like that there are wizards. it's the non-standard stuff . special connectors, custom parts , relays, thru hole resistors with various pitches.
Then there's all the courtyard requirements, every footprint has an embedded 3d model (step file ) that has to be made accurately ( no grey blobs... but mechanically accurate models). The wizards only go so far ...

Footprints need crosschecking between suppliers. ( a NXP sot23 is NOT the same as a diodes-inc SOT23 .. to the point that, if you use NXP's recommended footprint , you end up with soldering issues trying to put a diodes inc on there. for every new part requested the existing footprint needs a crosscheck if it will work. )


Professional Electron Wrangler.
Any comments, or points of view expressed, are my own and not endorsed , induced or compensated by my employer(s).
 

Online mrpackethead

  • Super Contributor
  • ***
  • Posts: 1871
  • Country: nz
Re: Wanted : PCB design support person
« Reply #9 on: January 30, 2018, 04:11:07 pm »
In deed.
 

Offline mrjoda

  • Contributor
  • Posts: 31
  • Country: sk
Re: Wanted : PCB design support person
« Reply #10 on: February 13, 2018, 01:49:16 am »
Hi free_electron,

i wrote you a message.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf