Author Topic: Flash Card CAF11-083  (Read 349 times)

0 Members and 1 Guest are viewing this topic.

Offline fastlink30

  • Newbie
  • Posts: 2
  • Country: it
Flash Card CAF11-083
« on: March 10, 2019, 12:08:25 am »
Hi all,
i need footprint, and if possible 3d of this flash card reader, looked around internet but found nothing for kicad, there are library ready for this component (or similar)?
thanks
 

Offline Doctorandus_P

  • Frequent Contributor
  • **
  • Posts: 536
  • Country: nl
Re: Flash Card CAF11-083
« Reply #1 on: March 10, 2019, 05:21:40 am »
KiCad has a pretty good Footprint editor, which works fairly similar like the rest of KiCad.
Getting to grips with it may take you one, or a few, hours, but after that you can draw footprints for components like this in 5 to 10 minutes if you have all the measurements available.

Drawing such footprints is probably faster than (trying to) find them on internet, and has a much higher success rate.

I never really understood why peope have such an aversion against drawing their own footprints.  :-//
It's easy. Really.
 

Offline fastlink30

  • Newbie
  • Posts: 2
  • Country: it
Re: Flash Card CAF11-083
« Reply #2 on: March 10, 2019, 08:55:41 pm »
at the end i get similar footprint from snapeda and made some small modifications.
problem is 3d model.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf