Cant find connector small enough

[ocset]

Hello,
Hello, we need a wire to board connector, 2 way. Size less than 13mm x 8mm (length x width), and height less than 10mm
We need the  connector (>0.5A) and rated to 400V at least. Though in nominal use it will have 75V between terminals.
This is the connector (Wago)  we currently use and its too big......   
Wago 2060-402/998-404 connector:
http://www.farnell.com/datasheets/2059654.pdf?_ga=2.212812052.1228178003.1512389256-191120965.1491231686&_gac=1.11806592.1512396957.EAIaIQobChMIuJKv2sXw1wIVRrcbCh19bQMeEAAYASAAEgKaW_D_BwE

We simply cannot find anything,     we have searched Wago, Pheonix, Molex, JST, etc, but nothing. 
Any ideas appreciated? 

[tszaboo]

3 position 3.5 mm pluggalble terminal block, with middle position skipped?

*that is a big picture.

[DerekG]

Simply put your requirements into the Digikey search box & see what is on offer:

https://www.digikey.com.au/products/en/connectors-interconnects/rectangular-connectors-headers-male-pins/314?k=header

[sparkswillfly]

https://www.eevblog.com/forum/manufacture/smt-wire-to-board-connector/

[HalFET]

How about those Molex Lite-Trap connectors? If you just need 2-way placing a few of those shouldn't be too much of a hassle, and they're quite forgiving in assembly and placement.