Author Topic: Electronic Assembly guide/manual?  (Read 825 times)

0 Members and 1 Guest are viewing this topic.

Offline Mattylad

  • Regular Contributor
  • *
  • Posts: 118
  • Country: gb
Electronic Assembly guide/manual?
« on: February 04, 2018, 09:16:39 pm »
Hello, does anyone know of a downloadable(editable) assembly manual for electrical assembly?
Guides on earthing methods, use of DIN rail terminals, wiring methods etc. ???

I'd like to put something together for at work where they have nothing, no records of schematics etc.
So I'm taking on the mantle of bringing them into the 20th century with schematics and hopefully a guide to how to build stuff properly :)
Matty
CID+
 

Offline ascarrul

  • Contributor
  • Posts: 6
  • Country: us
Re: Electronic Assembly guide/manual?
« Reply #1 on: February 05, 2018, 03:57:45 pm »
You want J-STD-001.
 

Offline Pizzallonut

  • Newbie
  • Posts: 2
  • Country: au
Re: Electronic Assembly guide/manual?
« Reply #2 on: February 06, 2018, 08:26:38 pm »
I was looking for it as well. I want to know where I can find it.
 

Offline Neomys Sapiens

  • Frequent Contributor
  • **
  • Posts: 544
  • Country: de
Re: Electronic Assembly guide/manual?
« Reply #3 on: February 07, 2018, 10:27:04 am »
Is it about packaging, interconnection, electromechanics, so NOT PCB-level assembly?
 

Offline Mattylad

  • Regular Contributor
  • *
  • Posts: 118
  • Country: gb
Re: Electronic Assembly guide/manual?
« Reply #4 on: February 08, 2018, 05:58:52 pm »
Yes, no PCB's involved.

Catering appliances mainly.

A good explanation of how Earthing should be done will do for a start (although I'm kind of writing this myself).
Matty
CID+
 

Offline Brianf

  • Newbie
  • Posts: 4
  • Country: gb
Re: Electronic Assembly guide/manual?
« Reply #5 on: February 08, 2018, 06:20:04 pm »
If you can find a copy, the BBC published ED122 "specification for the wiring of equipment". It's a bit 'old-school' and is aimed at AV equipment and systems but the basics, especially in regards to mains, are solid.
 
The following users thanked this post: Mattylad

Offline Neomys Sapiens

  • Frequent Contributor
  • **
  • Posts: 544
  • Country: de
Re: Electronic Assembly guide/manual?
« Reply #6 on: February 09, 2018, 09:00:04 am »
Industrial Sources and Documents:
ABB Electrical Installations Handbook, Sixth edition 2010
OSHA3067      Concepts and Techniques of Machine Safeguarding
OSHA3075      Controlling Electrical Hazards
Principles of electric grounding, Pfeiffer Engineering
Handbook for Electrical Safety, Cooper Bussman
ECT141      Electrical disturbances in LV, Schneider Electric
ECT166      Enclosures and degrees of protection, Schneider Electric
ECT172      System earthings in LV, Schneider Electric
ECT173      System earthings worldwide and evolutions, Schneider Electric
Basic Training (Electrical Motors) Leeson Electric
UCRL-MA-133867 ES&H Manual 16.2 Work and Design Controls for Electrical Equipment
UCRL-MA-133867 ES&H Manual 16.1 Electrical Safety
30072-200-50C   Handling, Installation, Operation, and Maintenance of Electrical Control Equipment
(Square-D Corp.)
0140ct92      Wiring Diagram Book (Square-D Corp.)
0110HO9503      Conductors and Continuous Loads (Square-D Corp.)
Technical aspects of enclosures RITTAL
Standard-compliant switchgear and controlgear production Application of IEC 61439 RITTAL


some excellent documents are freely available from US military sources, such as:
TM5-682      Facilities Design: Electrical Facilities Safety
TM5-683      Facilities Engineering Electrical Interior Facilities
TM5-684      Facilities Engineering Electrical Exterior Facilities
TM5-811-1   Electrical Power Supply and Distribution
MIL-HDBK-1004/1      Electrical Engineering: Preliminary Design Considerations
MIL-HDBK-1004/2a      Electrical Engineering: Power Distribution Systems
MIL-HDBK-1004/3      Electrical Engineering: Switchgear and Relaying
MIL-HDBK-1004/4      Electrical Engineering: Electric Utilization Systems
TRAMAN11038      Construction Electrician Basic   NETC
TRAMAN11039      Construction Electrician Intermediate   NETC
TRAMAN14259      Utilitiesman (Advanced)   NETC
TRAMAN14265      Utilitiesman Basic Vol.1   NETC
TRAMAN11038      Construction Electrician Basic   NETC
TRAMAN11039      Construction Electrician Intermediate   NETC
TRAMAN14259      Utilitiesman (Advanced)   NETC
TRAMAN14265      Utilitiesman Basic Vol.1   NETC
TRAMAN12411A   Electronics Technician Volume 1—Safety   NETC


SOME recommended books:
Handbook Of Electric Power Calculations, H. Wayne Beaty, McGraw-Hill
Electrician’s Pocket Manual   Rex Miller   McGraw-Hill
Electrician’s Troubleshooting and Testing Pocket Guide   H.B. Staufer  J.B. Traister   McGraw-Hill
Electrical Engineer's Portable Handbook   R.B. Hickey   McGraw-Hill
Electrical Safety Handbook; John Cadick, Mary Capelli-Schellpfeffer, Dennis K. Neitzel      McGraw-Hill
Troubleshooting and Repairing Commercial Electrical Equipment   David Herres   McGraw-Hill
Electrical Equipment Handbook -Troubleshooting and Maintenance   P. Kiameh   McGraw-Hill
Handbook of Electrical Design Details   N. Sclater J.E.Traister   McGraw-Hill
Electrical Construction Databook   Robert B. Hickey   McGraw-Hill
Consumer Electronics Troubleshooting and Repair Handbook   Homer I. Davidson   McGraw-Hill
Troubleshooting and Repairing Major Appliances   Eric Kleinert   McGraw-Hill
American Electricians' Handbook   T.Croft et.al   McGraw-Hill
Practical Guide to Inspection, Testing and Certification of Electrical Installations   Christopher Kitcher   Routledge
Audel Electrical Trades Pocket Manual   L.W.Brittian   Wiley
Audel Industrial Multi-Craft Mini-Ref   Thomas Bieber Davis   Wiley
Newnes Electrical Engineer's Handbook   D.F. Warne   Newnes
Practical Grounding, Bonding, Shielding and Surge Protection   G. Vijayaraghavan, Mark Brown, Malcolm Barnes,   Newnes
Practical Troubleshooting of Electrical Equipment and Control Circuits   M. Brown, J. Rawtani, D. Patil   Newnes
PAT: Portable Appliance Testing - In-Service Inspection and Testing of Electrical Equipment   Brian Scaddan   Newnes
Practical Machinery Safety   David M. Macdonald   Newnes
Newnes Electrical Pocket Book   Reeves & Heathcote   Newnes
Newnes Building Services Pocket Book   J. Knight P. Jones   Newnes
Electrical Codes, Standards, Recommended Practices and Regulations - An Examination of relevant Safety Considerations    Robert J. Alonzo   Elsevier
Electrical Installations Handbook Vol. 1: Power Supply and Distribution Systems   Seip   Wiley/Siemens
Electrical Installations Handbook Vol. 2: Power Cables, Protective Devices and Meters, Power Factor Corr., Standby Power Syst., Lighting, HVAC, Lifts   Seip   Wiley/Siemens
Electrical Installations Handbook Vol. 3: Large Buildings and Outdoor Areas, Special Installations, Installation Specifications and Safety Measures   Seip   Wiley/Siemens

I assumed you are only able to use materials in English, if you are able to read German, please tell.
Also country applicability would be helpful.

 
The following users thanked this post: Mattylad, noras, Mukrakiish

Offline Mattylad

  • Regular Contributor
  • *
  • Posts: 118
  • Country: gb
Re: Electronic Assembly guide/manual?
« Reply #7 on: February 10, 2018, 04:41:38 am »
The UK, I have updated my profile :)

I think Ill have to write it myself (not that anyone will take any notice of it )..
Matty
CID+
 

Offline Mattylad

  • Regular Contributor
  • *
  • Posts: 118
  • Country: gb
Re: Electronic Assembly guide/manual?
« Reply #8 on: February 14, 2018, 06:29:52 am »
BTW, anyone have any good into on choice of lock washer for earthing connections?
Im thinking a shakeproof one is the way to go, I have seen that in standards many times, but a colleague (who ought to know better) insists on using split ring washers (whjen he actually bothers to use them) and want to find some definitive proof that he's wrong :)
Matty
CID+
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf