Hi all,
I hope my English is good enough,…
I’m in the market for a new multimeter. I already have 2 old second hand Fluke meters. A Fluke 77 (Series 1, yes,..that grey bricky
) and a Fluke 183. Both within specs. I’ve seen a lot of Dave’s video’s about multimeters but not a shootout in the € 250 - € 300 range. After a list of 10 multimeters I end up with 3 multimeters. The Brymen BM869S, BK Precision BK393 and the Agilent/Keysight U1241B.
I believe that they are all three good meters with their own pros and cons if I can thrust the datasheets.
For my electronics use the BM869S would be my first choice. About the BK393 & the U1241B I cannot find many use full video’s while there is a lot to find about the BM869S.
Have anybody of you experiences with the BK393 or the U1241B and should one of these meters a better choice considering the measurement- and overall quality over the years? The meter will not be stored in a toolbox and outdoors usage.
I hope you can tell me something to learn from, before I purchase a meter.
Thank very much.