As they say in a former neighborhood I used to live in "CooCox be dead"
So, I am trying to code the STM32F7 in C (I'm an assembly man) and the best thing I found so far to integrate it all together is this:
How to prepare IDE for STM32 in eclipse?
He speaks a little softly, but just follow the bouncing ball.
For those who copy and paste, in the External Tools Configuration section, the text is as follows:
-f scripts/interface/stlink-v2.cfg
-f scripts/target/stm32fxx_stlink.cfg
-c "init; reset halt"
-c "flash write_image erase project_name.elf"
-c "reset run; shutdown"
And for those who also like STM32, another thing is to read Carmine Noviello's book Mastering STM32:
https://leanpub.com/mastering-stm32 where he clearly explains how to install a standalone Eclipse.
I recommend Eclipse Mars.
Eclipse tutorials for different chipsets are out there. Just look.
There's one on TI that's good as well.
The best part is that this is all free.