« previous next »
Pages: [1]   Go Down

Author Topic: Codewarrior and USB Multilink in Windows 7/64  (Read 1601 times)

0 Members and 1 Guest are viewing this topic.

Online AndersJTopic starter

  • Frequent Contributor
  • **
  • Posts: 408
  • Country: se
Codewarrior and USB Multilink in Windows 7/64
« on: May 03, 2016, 08:37:18 am »
I use CodeWarrior 4.7 for HCS12X, and CW 6.3 for HCS08.
I also use the USB Multilink, primarily to download code, not so much for debugging.
I run this in Windows 2000 since these tools do not work properly in 64 bit Windows 7.

Have the problems been dealt with?
Will the current version of CW and USB Multilink work W7/64, or are there still problems?

How about Windows 10?

Thankful for any clarifications,
Anders J
Logged
"It should work"
R.N.Naidoo
 

Offline LarryMartin

  • Newbie
  • Posts: 6
Re: Codewarrior and USB Multilink in Windows 7/64
« Reply #1 on: May 05, 2016, 01:17:27 am »
I've run CodeWarrior for MCU 10.6 and USB Multilink successfully on Win7 64 Pro.
Logged
 

Offline nctnico

  • Super Contributor
  • ***
  • Posts: 26906
  • Country: nl
    • NCT Developments
Re: Codewarrior and USB Multilink in Windows 7/64
« Reply #2 on: May 05, 2016, 01:21:32 am »
On the same PC of a different PC? My USB Multilink (also for HCS08) won't work on my newest PC due to a USB compatibility issue in the Multilink device.
Logged
There are small lies, big lies and then there is what is on the screen of your oscilloscope.
 

Offline LarryMartin

  • Newbie
  • Posts: 6
Re: Codewarrior and USB Multilink in Windows 7/64
« Reply #3 on: May 06, 2016, 03:12:56 am »
Yes. Same PC, and with each other.
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee