It looks like you haven't got the Microchip XC8 C compiler for PIC10/12/16 and PIC18 installed correctly. It is *NOT* bundled with MPLAB X, you have to install it separately. From the errors you are getting its most likely you have some version of the discontinued and obsolete HiTech C compiler for PIC10/12/16 installed. Unless you have a paid licence for it I *STRONGLY* recommend upgrading to XC8
Also, are you sure about that development board number?
AC162049 is the old version of Microchip's Universal Programming Module.
It is only intended for *PROGRAMMING* DIP package PICs that you are then going to move to a different board to run them. Its got no switches or LEDs and no provision for external power.
N.B. Please don't abbreviate PIC part numbers as it causes great confusion. Fortunately this time there are no other devices with '630' in their part number to cause confusion so we know you mean the PIC
16F630.
P.S. you can copy the error messages direct from the MPLAB output window and paste them here in
BBcode code tags. Start by clearing the output window, do a build and copy the result. You may wish to first paste it into a text editor so you can replace your user name in file paths with a string of ***** before pasting the result here. If we have the *original* error message(s) we can often provide far more specific help.