What the topic says, chances are that the ST62T10 that I have is "protected" anyway but I think it's still worth a shoot. The actual board that uses it it's sort of obsolete and unobtanium.
I have 2 good working samples and one dead, If I can somehow read the ROM from the good ones and program the new chips that I've ordered from Taiwan (hoping they're the real thing), I will be able to resurrect the dead board. These are the espresso machine touchpad controllers for what it matters.
Anyway my programmer (Wellon VP480) doesn't support this chip, I really don't want to spend
too much on a programmer that does it, let's say around $100 ~ $150 range, as this is going to be a one time job most likely and there is a high probability that the chips that I have are read protected anyway.
So I'm looking to buy a prefferably used programmer that supports a ST62T10 series, USB Serial or Parallel doesn't matter, I can setup a DOS machine for the purpose.
Any pointers?