Only the "Project" and "SystemDriveParams" folders are interesting. If you leave out the SDK binaries (search for .a .o .pbi .cout etc, should be in subfolders like "MC Library Compiled"), it should not be that large.
I hope I have not deleted too many files ...
https://meocloud.pt/link/3eaf8bf7-7baa-4699-af75-c8520d082afd/stm_foc_sdk.rar/
Should be complete. I checked --> #define SW_OV_CURRENT_PROT_ENABLING DISABLE
Your Eclipse project file is not included there, that would be essential. The library extensively uses #define rubbish.
I checked my IAR project. It defines the following globals:
USE_STDPERIPH_DRIVER
STM32F10X_MD
ARM_MATH_CM3
Here is the search path for .c/h files:
$PROJ_DIR$\..\..\STM32 PMSM FOC LIBv4.0\ProtectedSources\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x
$PROJ_DIR$\..\..\STM32 PMSM FOC LIBv4.0\ProtectedSources\Libraries\STM32F10x_StdPeriph_Driver\inc
$PROJ_DIR$\..\..\STM32 PMSM FOC LIBv4.0\ProtectedSources\MCLibrary
$PROJ_DIR$\..\..\STM32 PMSM FOC LIBv4.0\ProtectedSources\MCLibrary\inc
$PROJ_DIR$\..\..\STM32 PMSM FOC LIBv4.0\ProtectedSources\MCLibrary\interface
$PROJ_DIR$\..\..\STM32 PMSM FOC LIBv4.0\ProtectedSources\MCLibrary\interface\common
$PROJ_DIR$\..\..\STM32 PMSM FOC LIBv4.0\ProtectedSources\MCApplication\inc
$PROJ_DIR$\..\..\STM32 PMSM FOC LIBv4.0\ProtectedSources\MCApplication\interface
$PROJ_DIR$\..\..\STM32 PMSM FOC LIBv4.0\ProtectedSources\UILibrary\inc
$PROJ_DIR$\..\..\STM32 PMSM FOC LIBv4.0\ProtectedSources\UILibrary\interface
$PROJ_DIR$\
$PROJ_DIR$\SystemDriveParams
For some of the files you only have the compiled libary binaries.
Have you been more successful with the new kit? Does the RS232 link work?