« previous next »
Pages: [1]   Go Down

Author Topic: Segger Embedded Studio  (Read 1486 times)

0 Members and 1 Guest are viewing this topic.

Offline ali_asadzadehTopic starter

  • Super Contributor
  • ***
  • Posts: 1902
  • Country: ca
Segger Embedded Studio
« on: November 11, 2018, 05:45:16 am »
Hi,
I just have downloaded it, it simply works and it has lots of stuff for free (embos, emIP,emwin,etc...),before you want to make any commercial product, what are your experiences with it? should I stick to keil and let it go, or does it worth the try? cause I see segger has the support for RISC-V parts too, so they might have a better future ^-^
Logged
ASiDesigner, Stands for Application specific intelligent devices
I'm a Digital Expert from 8-bits to 64-bits
 

Offline donotdespisethesnake

  • Super Contributor
  • ***
  • Posts: 1093
  • Country: gb
  • Embedded stuff
Re: Segger Embedded Studio
« Reply #1 on: November 11, 2018, 07:13:53 am »
Deja vu https://www.eevblog.com/forum/microcontrollers/segger-embedded-studio/

It's not free for commercial use, if you want to use embOs etc it's €9980 per user. The trend is for manufacturers to bundle a license-free IDE with their chip support, so Segger seem to be bucking the trend.

Logged
Bob
"All you said is just a bunch of opinions."
 

Offline richardman

  • Frequent Contributor
  • **
  • Posts: 427
  • Country: us
Re: Segger Embedded Studio
« Reply #2 on: November 12, 2018, 02:09:22 am »
Embedded Studio is Crosswork repackaged, so if you like that...
Logged
// richard http://imagecraft.com/
JumpStart C++ for Cortex (compiler/IDE/debugger): the fastest easiest way to get productive on Cortex-M.
Smart.IO: phone App for embedded systems with no app or wireless coding
 

Offline ali_asadzadehTopic starter

  • Super Contributor
  • ***
  • Posts: 1902
  • Country: ca
Re: Segger Embedded Studio
« Reply #3 on: November 12, 2018, 02:20:46 pm »
I liked the segger libraries! ^-^ ^-^ ^-^ ^-^ ^-^ ^-^ ^-^ ^-^ ^-^
Logged
ASiDesigner, Stands for Application specific intelligent devices
I'm a Digital Expert from 8-bits to 64-bits
 

Offline Harjit

  • Regular Contributor
  • *
  • Posts: 141
  • Country: us
Re: Segger Embedded Studio
« Reply #4 on: November 13, 2018, 01:32:47 am »
I've used CrossWorks for years and just finished switching to Embedded Studio. I think it is a well done product.
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee