Suggestions/Guidance to learn to program SoCs(ZYNQ7 on a Zedboard)

[gauravmp]

Hi,

I'm familiar with FPGAs and pretty good with Microcontrollers although I've never used an ARM processor before. I'm experimenting around with a Zedboard that has a zynq7 device and I'm looking for some help/guidance on how to go about learning the structure or design flow to making a program.

I have been doing my own research and I understand how to configure the PS and PL and how to interconnect them through some existing IPs but I'm more so looking for some help on how to form an interconnect between the PS and PL when I make my own hardware circuitry in the PL.

Any help on suggested readings that would explain SoCs would be great!

Thanks

[tggzzz]

You should be able to adapt the content of
https://forums.xilinx.com/t5/Xcell-Daily-Blog/Adam-Taylor-s-MicroZed-Chronicles-Part-144-Cracking-open-High/ba-p/716979
http://svenand.blogdrive.com/archive/160.html

[gauravmp]

Thank you!

[Kremmen]

Also this can help: http://www.zynqbook.com/