Poll

Morning all, using a teensy 3.5 for a Leds panel with two 60A 5V switching powersupplies and would like to protect it from power surgles. Any suggestion ?

R/C filter
0 (0%)
Surge protector
1 (100%)

Total Members Voted: 1

« previous next »
Pages: [1]   Go Down

Author Topic: Surge protection for teensy 3.5  (Read 784 times)

0 Members and 1 Guest are viewing this topic.

Offline reggiewattersonTopic starter

  • Newbie
  • Posts: 2
  • Country: us
Surge protection for teensy 3.5
« on: March 20, 2019, 06:27:25 pm »
Surge protection for teensy 3.5 on switching power supplies 60A 5V used for Led light panel. Suggestions?
Logged
 

Online ajb

  • Super Contributor
  • ***
  • Posts: 2601
  • Country: us
Re: Surge protection for teensy 3.5
« Reply #1 on: March 21, 2019, 03:37:05 am »
What sort of surges?  From what?  On the power rail, or on IO pins?  If on IO pins, what sort of signals need to pass?  How many lines?
Logged
 

Offline reggiewattersonTopic starter

  • Newbie
  • Posts: 2
  • Country: us
Re: Surge protection for teensy 3.5
« Reply #2 on: March 21, 2019, 03:56:51 pm »
Good morning, right now I am powering up the teensy along with 3500 Leds on the two power supplies. So that is the main power rail. In order to protect the teensy from the start up or any surges it might be worth while to isolate it from the main lead.
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee