Author Topic: Vending machine protocols (MDB, DEX): SW implementation and HW interfaces  (Read 3255 times)

0 Members and 1 Guest are viewing this topic.

Offline pascal_swedenTopic starter

  • Super Contributor
  • ***
  • Posts: 1539
  • Country: no
Hello,

I was wondering if there are people here on this forum with broad experience in vending machine protocols (MDB, DEX):

- SW implementation
- HW interfaces
- Devices to test MDB and DEX
- Reference Vending Machine Controller boards with good implementations for MDB and DEX

Pascal
 

Offline dannyf

  • Super Contributor
  • ***
  • Posts: 8221
  • Country: 00
Re: Vending machine protocols (MDB, DEX): SW implementation and HW interfaces
« Reply #1 on: December 05, 2015, 12:59:19 pm »
If you know the protocol, I am sure it can be done.
================================
https://dannyelectronics.wordpress.com/
 

Offline nuhamind2

  • Regular Contributor
  • *
  • Posts: 138
  • Country: id
Re: Vending machine protocols (MDB, DEX): SW implementation and HW interfaces
« Reply #2 on: December 08, 2015, 02:18:23 am »
I once was pulling all-nighter for a week developing MDB converter prototype (Arduino mega plus some jumper wire) to be used in exhibition . The device act as bridge between Vending Machine controller and PC, so the payment process can be controlled by PC.

The MDB protocol itself is open, including the hardware spec and sw protocol. Don't know about DEX.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf