PIC Programmer using Arduino

[epy]

This is Demo to guide how to build PIC Programmer using Arduino Board. We can use any Arduino board to program PIC Controller. This programmer works only on PIC which has Low Voltage Programming.
I am using PIC16F1847 pic which has Low Voltage Programming.
This project requires only arduino board and PIC which is to be program.


https://youtu.be/kpQ2t9pA1HQ

[epy]

Required Components:
Arduino Board With USB to Serial
USB to Serial (if USB to serial is not present on Board)
PIC Controller like PIC16F1847
Breadboard
Jumpers
LED
Resistor - 220 ohm

Here is Schematic for the Project
https://github.com/embhobbb/a-p-prog/blob/master/rough%20Schematic.png

[@rt]

At last! A proper use for an Arduino

[epy]

yeah ... 
But Arduino is involved in almost all things some how. and even to develop the project on other architecture family arduino is required just like above.

[jaromir]

Hello, author of the programming software here; I'm glad you found it useful. Should you verify it's functionality on other devices, let me know and I'll update the support table, or do pull request.

[bitseeker]

Neat. Thanks for the heads up.

[epy]

Hello, author of the programming software here; I'm glad you found it useful. Should you verify it's functionality on other devices, let me know and I'll update the support table, or do pull request.

Hey Thanks for you study and research. I am happy to talk with you.
defenitely i will test for the PIC's which will be available for me and report to you..