Author Topic: Video Demo & Experiments with the World's Fastest Oscilloscope! [TheSignalPath]  (Read 29771 times)

0 Members and 1 Guest are viewing this topic.

Offline HugoneusTopic starter

  • Frequent Contributor
  • **
  • Posts: 955
  • Country: us
    • The Signal Path Video Blog
Experiments and Demo of an Agilent DSA-X 96204Q 160GS/s 62GHz Oscilloscope

In this episode Shahriar demos the world's fastest oscilloscope! The Agilent DSA-X 96204Q offers 160GS/s of conversionrate  with a bandwidth of 62GHz on two dedicated 'RealEdge' channels. It can also provide 80GS/s conversion rate and 33GHz of bandwidth on four simultaneous channels. The unit demoed on this video is equipped with all available options and is valued at over 0.5 million US dollars. The block diagram of various sub-systems of the oscilloscope are presented and the principle operation of the instrument is explained. A 56Gb/s PRBS-15 signal is applied to the scope from a Centellax 2G2T5A (now Agilent N4975A) and the resulting data pattern is examined in real-time. Various scope functions are also presented as well as the capability to observer bit failures at baud-rate using this instrument.

As a second experiment, two 3.125Gb/s PRBS-7 data streams are simultaneously up-convered to 20GHz and 40GHz respectively by using a pair of MITEQ mm-wave DSB tripple balanced mixers and a pair of Avantek 20-40GHz YIG oscillators. The resulting two signals are combined by using a power-combiner and fed to the oscilloscope. The capability of the instrument to act as an ultra-broadband software-defined radio is demonstrated by recovering the the two PRBS sequences simultaneously through DSP post processing. The block diagram of this setup can be downloaded from The Signal Path website.

You can see the video here: [1 Hour & 10 Minutes]
http://thesignalpath.com/blogs/2013/08/13/experiments-and-demo-of-an-agilent-dsa-x-96204q-160gss-62ghz-oscilloscope/

More videos at The Signal Path:
http://thesignalpath.com/blogs/
« Last Edit: August 13, 2013, 04:51:36 pm by Hugoneus »
 

Offline olsenn

  • Frequent Contributor
  • **
  • Posts: 993
Dammit Shahriar; how the hell do you get your hands on all this uber expensive equipment?
 

Offline HugoneusTopic starter

  • Frequent Contributor
  • **
  • Posts: 955
  • Country: us
    • The Signal Path Video Blog
Dammit Shahriar; how the hell do you get your hands on all this uber expensive equipment?

Friends in high places! ;)

Online Mechatrommer

  • Super Contributor
  • ***
  • Posts: 11537
  • Country: my
  • reassessing directives...
awesome!  :-+
Nature: Evolution and the Illusion of Randomness (Stephen L. Talbott): Its now indisputable that... organisms “expertise” contextualizes its genome, and its nonsense to say that these powers are under the control of the genome being contextualized - Barbara McClintock
 

Offline c4757p

  • Super Contributor
  • ***
  • Posts: 7799
  • Country: us
  • adieu
Anybody looking for some sticker shock? Look up the price of the signal generator he was probing with that beast of scope... >:D

I loved the section on the input/ADC. Thanks :-+
No longer active here - try the IRC channel if you just can't be without me :)
 

Offline HugoneusTopic starter

  • Frequent Contributor
  • **
  • Posts: 955
  • Country: us
    • The Signal Path Video Blog
Anybody looking for some sticker shock? Look up the price of the signal generator he was probing with that beast of scope... >:D

I loved the section on the input/ADC. Thanks :-+

Well, you've got to connect something expensive to a half-a-million-dollar scope!

Offline c4757p

  • Super Contributor
  • ***
  • Posts: 7799
  • Country: us
  • adieu
Yeah, I can't think of too many affordable ways to generate a signal worth sticking a 62 GHz scope on!
No longer active here - try the IRC channel if you just can't be without me :)
 

Offline HugoneusTopic starter

  • Frequent Contributor
  • **
  • Posts: 955
  • Country: us
    • The Signal Path Video Blog
Yeah, I can't think of too many affordable ways to generate a signal worth sticking a 62 GHz scope on!

What did you think of the second experiment with dual 3.125Gb/s PRBS7 up-conversion to 20GHz and 40GHz bands?

Offline free_electron

  • Super Contributor
  • ***
  • Posts: 8515
  • Country: us
    • SiliconValleyGarage
Ah, that's the twin of the one i used to test the Jim Williams pulse generator. They didn't have that one ready yet. They were working on it, it was still in area51 ...

To see real pictures of that sampler hybrid :

https://www.eevblog.com/forum/testgear/agilent-dsa-x93204a-33ghz-80gss-teardown/msg195482/#msg195482

Professional Electron Wrangler.
Any comments, or points of view expressed, are my own and not endorsed , induced or compensated by my employer(s).
 

Offline c4757p

  • Super Contributor
  • ***
  • Posts: 7799
  • Country: us
  • adieu
My scopes just fart and shut off if I suggest using them as radios at any data rate! ::)

I'm amazed that you could recover so much data moving in and out of Fourier transforms like that. Of course, I have pretty much no experience in proper digital signal processing. Is there any chance we could get a look at your MATLAB code? I've used it plenty, but not for this kind of thing. I'd love to see what exactly you're doing.
No longer active here - try the IRC channel if you just can't be without me :)
 

Offline HugoneusTopic starter

  • Frequent Contributor
  • **
  • Posts: 955
  • Country: us
    • The Signal Path Video Blog
My scopes just fart and shut off if I suggest using them as radios at any data rate! ::)

I'm amazed that you could recover so much data moving in and out of Fourier transforms like that. Of course, I have pretty much no experience in proper digital signal processing. Is there any chance we could get a look at your MATLAB code? I've used it plenty, but not for this kind of thing. I'd love to see what exactly you're doing.

Going in and out of FFT in Matlab is lossless on it own. Of course, the filtering and shifting things around is not. :)

I can try posting the Matlab code that I wrote. I would have to add some comments to it so people can follow it.

Offline HugoneusTopic starter

  • Frequent Contributor
  • **
  • Posts: 955
  • Country: us
    • The Signal Path Video Blog
Ah, that's the twin of the one i used to test the Jim Williams pulse generator. They didn't have that one ready yet. They were working on it, it was still in area51 ...

To see real pictures of that sampler hybrid :

https://www.eevblog.com/forum/testgear/agilent-dsa-x93204a-33ghz-80gss-teardown/msg195482/#msg195482

Great, thanks for posting that. I should have asked for the ADC module also. I remember holding it in my hand while it was in development. At the time, 80GS/s was mind blowing.

Offline dr.diesel

  • Super Contributor
  • ***
  • Posts: 2214
  • Country: us
  • Cramming the magic smoke back in...
Great video!

But for $500k you only get crappy microwave pop buttons?

Offline Lukas

  • Frequent Contributor
  • **
  • Posts: 412
  • Country: de
    • carrotIndustries.net
http://www.microwavejournal.com/articles/9838-inp-hbt-chipset-enabling-high-bandwidth-real-time-oscilloscope-architecture There's some fairly in-depth description of how the sampler works.

http://poulton.net/ This Guy seems to be one of the engineers behind these super fast ADCs.

BTW: Lecroy claims to have 100 GSas/s realtime: http://teledynelecroy.com/100ghz/
 

Offline HugoneusTopic starter

  • Frequent Contributor
  • **
  • Posts: 955
  • Country: us
    • The Signal Path Video Blog
http://www.microwavejournal.com/articles/9838-inp-hbt-chipset-enabling-high-bandwidth-real-time-oscilloscope-architecture There's some fairly in-depth description of how the sampler works.

http://poulton.net/ This Guy seems to be one of the engineers behind these super fast ADCs.

BTW: Lecroy claims to have 100 GSas/s realtime: http://teledynelecroy.com/100ghz/

Thanks for posting the articles.

I tried to invite Poulton to write a paper on ultra-highspeed ADCs for CSICS this year, unfortunately he was not able to participate.

As for LeCroy, I will believe it when I see it. I used their current >60GHz scope and did not find its performance to match that of Agilent. They use digital bandwidth interleaved technology and I could not get very good results for viewing high-bandwidth signals which spans multiple spectral bands. But competition is always good! :)

Offline branadic

  • Super Contributor
  • ***
  • Posts: 2379
  • Country: de
  • Sounds like noise
Quote
Video Demo & Experiments with the World's Fastest Oscilloscope!

Wasn't it Teledyne LeCroy having a much faster scope with 100GHz bandwidth and 240 GS/s?

http://www.elektronikpraxis.vogel.de/messen-und-testen/articles/413028/
Computers exist to solve problems that we wouldn't have without them. AI exists to answer questions, we wouldn't ask without it.
 

Offline HugoneusTopic starter

  • Frequent Contributor
  • **
  • Posts: 955
  • Country: us
    • The Signal Path Video Blog
Quote
Video Demo & Experiments with the World's Fastest Oscilloscope!

Wasn't it Teledyne LeCroy having a much faster scope with 100GHz bandwidth and 240 GS/s?

http://www.elektronikpraxis.vogel.de/messen-und-testen/articles/413028/

Not production and not true real-time sampling. It is block down-conversion and DSP combining, same as their 65G scope.

Offline DavidDLC

  • Frequent Contributor
  • **
  • Posts: 755
  • Country: us
I really enjoyed the video, that is some serious stuff right there.

I started to look at the video and I just want to keep looking until the end. ( Which I did :) )

Good work !

David.
 

Offline Lukas

  • Frequent Contributor
  • **
  • Posts: 412
  • Country: de
    • carrotIndustries.net
BTW: Lecroy claims to have 100 GSas/s realtime: http://teledynelecroy.com/100ghz/
s/Sa/Hz/ ...
 

Offline c4757p

  • Super Contributor
  • ***
  • Posts: 7799
  • Country: us
  • adieu
But for $500k you only get crappy microwave pop buttons?

I don't think that's the sort of button they're using here. They are just recessed.
No longer active here - try the IRC channel if you just can't be without me :)
 

Offline dr.diesel

  • Super Contributor
  • ***
  • Posts: 2214
  • Country: us
  • Cramming the magic smoke back in...
But for $500k you only get crappy microwave pop buttons?

I don't think that's the sort of button they're using here. They are just recessed.

Perhaps, but you can hear them popping, over the fans even!  My G-mas microwave, 80s calculators, Speak and Spell etc.

Offline HugoneusTopic starter

  • Frequent Contributor
  • **
  • Posts: 955
  • Country: us
    • The Signal Path Video Blog
Update: It is possible that the RealEdge modules do not perform THA functions but rather block down-conversion. In this case, each of the 80GS/s acquisition boards digitizes 32GHz worth of bandwidth and recombining is done in DSP. This is similar to the method LeCroy employs in their scopes.

I have added a note to the video as well.

Offline dr.diesel

  • Super Contributor
  • ***
  • Posts: 2214
  • Country: us
  • Cramming the magic smoke back in...
How is the teardown video coming?

Offline HugoneusTopic starter

  • Frequent Contributor
  • **
  • Posts: 955
  • Country: us
    • The Signal Path Video Blog
How is the teardown video coming?

Ha! Sadly, not possible... It was very tempting, especially after the second beer.

Offline dr.diesel

  • Super Contributor
  • ***
  • Posts: 2214
  • Country: us
  • Cramming the magic smoke back in...
How is the teardown video coming?

Ha! Sadly, not possible... It was very tempting, especially after the second beer.

I'll PM you my address, I'll get it apart before the Agilent hitmen get here!   :scared:

Offline Lukas

  • Frequent Contributor
  • **
  • Posts: 412
  • Country: de
    • carrotIndustries.net
Update: It is possible that the RealEdge modules do not perform THA functions but rather block down-conversion. In this case, each of the 80GS/s acquisition boards digitizes 32GHz worth of bandwidth and recombining is done in DSP. This is similar to the method LeCroy employs in their scopes.

I have added a note to the video as well.
Sounds reasonable for some reasons:
1. The 32GHz clock fed into the real edge module
2. http://www.tek.com/document/whitepaper/techniques-extending-real-time-oscilloscope-bandwidth They claim that there's a dip in the frequency response at 32GHz ... coincidence!
3. Service manual: "This Service Guide does not describe the RealEdge Technology assembly in any detail, as the technology is Agilent proprietary" Nothing to see here, go away.

It would have been quite challenging for marketing to explain why they're now using frequency interleaving, because they mocked it in http://cp.literature.agilent.com/litweb/pdf/5990-5271EN.pdf
 

Offline HugoneusTopic starter

  • Frequent Contributor
  • **
  • Posts: 955
  • Country: us
    • The Signal Path Video Blog
Update: It is possible that the RealEdge modules do not perform THA functions but rather block down-conversion. In this case, each of the 80GS/s acquisition boards digitizes 32GHz worth of bandwidth and recombining is done in DSP. This is similar to the method LeCroy employs in their scopes.

I have added a note to the video as well.
Sounds reasonable for some reasons:
1. The 32GHz clock fed into the real edge module
2. http://www.tek.com/document/whitepaper/techniques-extending-real-time-oscilloscope-bandwidth They claim that there's a dip in the frequency response at 32GHz ... coincidence!
3. Service manual: "This Service Guide does not describe the RealEdge Technology assembly in any detail, as the technology is Agilent proprietary" Nothing to see here, go away.

It would have been quite challenging for marketing to explain why they're now using frequency interleaving, because they mocked it in http://cp.literature.agilent.com/litweb/pdf/5990-5271EN.pdf

Exactly.

The fact that Agilent has always claimed that block-down conversion is a bad idea, I took it for granted that they were not doing it. I had a hard time understanding how they were doing THA for 80GS/s ADCs with a 32GHz clock signal, which of course they are not!

What do you do for a living Lukas?

Offline marshallh

  • Supporter
  • ****
  • Posts: 1462
  • Country: us
    • retroactive
Verilog tips
BGA soldering intro

11:37 <@ktemkin> c4757p: marshall has transcended communications media
11:37 <@ktemkin> He speaks protocols directly.
 

Offline crisr

  • Contributor
  • Posts: 46
  • Country: br
Hurry up, if you buy one of these until September 30th, Agilent will throw in a free DSOX3034A! How can anyone pass this up?  ;D

http://www.home.agilent.com/agilent/editorial.jspx?cc=US&lc=eng&ckey=2316099&nid=-33202.0&id=2316099
 

Offline c4757p

  • Super Contributor
  • ***
  • Posts: 7799
  • Country: us
  • adieu
Ooh! I'll take six!
No longer active here - try the IRC channel if you just can't be without me :)
 

Offline olsenn

  • Frequent Contributor
  • **
  • Posts: 993
If you overload the input on that scope, somebody is going to kill you :)

I wonder how many of those they sell. I imagine most are rented
 

Offline HugoneusTopic starter

  • Frequent Contributor
  • **
  • Posts: 955
  • Country: us
    • The Signal Path Video Blog
If you overload the input on that scope, somebody is going to kill you :)

I wonder how many of those they sell. I imagine most are rented

They have sold quiet a few already.

Offline c4757p

  • Super Contributor
  • ***
  • Posts: 7799
  • Country: us
  • adieu
If you overload the input on that scope, somebody is going to kill you :)

Any idea how extensive the damage would be? I figure it's not exactly packed to the gills with input protection, that would totally destroy the bandwidth.... but how far would the damage propagate if it took 20V?
No longer active here - try the IRC channel if you just can't be without me :)
 

Offline HugoneusTopic starter

  • Frequent Contributor
  • **
  • Posts: 955
  • Country: us
    • The Signal Path Video Blog
If you overload the input on that scope, somebody is going to kill you :)

Any idea how extensive the damage would be? I figure it's not exactly packed to the gills with input protection, that would totally destroy the bandwidth.... but how far would the damage propagate if it took 20V?

It all depends on what vertical setting it is set to. It has a front-end mechanical attenuator, so you could damage the resistors in the 67GHz attenuator if it is set to high attenuation. But if the scope is set to 2mV/Div, then you can directly damage the front-end. If an overload condition is observed the scope quickly jumps to high-attenuation however.

Offline w2aew

  • Super Contributor
  • ***
  • Posts: 1780
  • Country: us
  • I usTa cuDnt speL enjinere, noW I aR wuN
    • My YouTube Channel
Update: It is possible that the RealEdge modules do not perform THA functions but rather block down-conversion. In this case, each of the 80GS/s acquisition boards digitizes 32GHz worth of bandwidth and recombining is done in DSP. This is similar to the method LeCroy employs in their scopes.

I have added a note to the video as well.
Sounds reasonable for some reasons:
1. The 32GHz clock fed into the real edge module
2. http://www.tek.com/document/whitepaper/techniques-extending-real-time-oscilloscope-bandwidth They claim that there's a dip in the frequency response at 32GHz ... coincidence!
3. Service manual: "This Service Guide does not describe the RealEdge Technology assembly in any detail, as the technology is Agilent proprietary" Nothing to see here, go away.

It would have been quite challenging for marketing to explain why they're now using frequency interleaving, because they mocked it in http://cp.literature.agilent.com/litweb/pdf/5990-5271EN.pdf

Note also in the video that the FFT of the noise floor, before applying the frequency translated PRBS signals, shows peaking around 32GHz, indicating that there may be some DSP boosting going on there to try to flatten out a dip at the point where the bands are split.
YouTube channel: https://www.youtube.com/w2aew
FAE for Tektronix
Technical Coordinator for the ARRL Northern NJ Section
 

Offline HugoneusTopic starter

  • Frequent Contributor
  • **
  • Posts: 955
  • Country: us
    • The Signal Path Video Blog
Quote
Note also in the video that the FFT of the noise floor, before applying the frequency translated PRBS signals, shows peaking around 32GHz, indicating that there may be some DSP boosting going on there to try to flatten out a dip at the point where the bands are split.

Yes, I am convinced that you are right about this. Thank you.

Offline HugoneusTopic starter

  • Frequent Contributor
  • **
  • Posts: 955
  • Country: us
    • The Signal Path Video Blog
Hurry up, if you buy one of these until September 30th, Agilent will throw in a free DSOX3034A! How can anyone pass this up?  ;D

http://www.home.agilent.com/agilent/editorial.jspx?cc=US&lc=eng&ckey=2316099&nid=-33202.0&id=2316099

Its funny that you say that, because we bought a bunch of stuff and have a few of these little guys sitting around now. They offer this promotion on a few items.

Offline crisr

  • Contributor
  • Posts: 46
  • Country: br
Yeah, it seems like you can get a free DSOX3034A by spending as little as US$18,581... equivalent to more than 40% off. It's actually a very good deal assuming you need a Pulse Function Arbitrary Noise Generator.  ;)
 

Offline Psi

  • Super Contributor
  • ***
  • Posts: 9889
  • Country: nz
Is pretty remarkable,

Just imagine in 40 years with graphene transistors or other technology we might all have a cellphones (or eqiv) that can sample/produce up to 100Ghz for some sort of ultra fast software defined radio RX&TX communications.
Greek letter 'Psi' (not Pounds per Square Inch)
 

Offline vaualbus

  • Frequent Contributor
  • **
  • Posts: 352
  • Country: it
As now have the sure to said the real edge do step down conversion or is just a track and hold amplifier?
Some one have some more info on that?
Just to know theorically how much an adc of this machine cost (50k, 60k)?
 

Offline w2aew

  • Super Contributor
  • ***
  • Posts: 1780
  • Country: us
  • I usTa cuDnt speL enjinere, noW I aR wuN
    • My YouTube Channel
As now have the sure to said the real edge do step down conversion or is just a track and hold amplifier?
Some one have some more info on that?
Just to know theorically how much an adc of this machine cost (50k, 60k)?

All evidence points to the use of a block down-conversion scheme.  Agilent's 80GS/s ADC is a large array of S/H+ADCs all running at a lower speed.  If I recall correctly, there are 160 (or more) that are used to make up the 80GS/s base sample rate.
YouTube channel: https://www.youtube.com/w2aew
FAE for Tektronix
Technical Coordinator for the ARRL Northern NJ Section
 

Offline vaualbus

  • Frequent Contributor
  • **
  • Posts: 352
  • Country: it
Shahriar this oscilloscope i no more the more fats production oscilloscope, apparently agilent have released a new series of oscilloscope.
The DSAZ634A apparently tha have better performance thant the other scope.
At first the biggest difference we can see from the agilent picture is that now there isn't no more the seperate connector for high speed signal and not.
Just only the channel connector.
The cost without option is just "only" 453k of dollars!
I wish you know something more on this scope and what is new from the predecessor.
Best regards, Alberto.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf