Author Topic: Heathkit IT-11 Re-calibration with precision resistors  (Read 1071 times)

0 Members and 1 Guest are viewing this topic.

Offline jcrubinTopic starter

  • Frequent Contributor
  • **
  • Posts: 353
  • Country: us
    • Technocoma
Heathkit IT-11 Re-calibration with precision resistors
« on: July 21, 2016, 01:54:54 pm »
I put together a list of needed resistor values from Mauser to attain 1% or better at .5 watt for my IT 11 and installed and re-calibrated the device with those values.  The results turned out amazing.
I also replaced the 9.1 OHM resistor as well.


CVM CATAPVLTAE PROSCRIPTAE ERVNT TVM SOLI PROSCRIPTI CATAPVLTAS HABEBVNT

https://www.youtube.com/c/jordanrubin6502
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf