Hi everyone,
I’m opening this topic to share a piece of PC software I wrote recently: an FFT tracer.
I designed it originally to help myself at work, where I wanted to analyze the frequency content of the output signal of an accelerometer. I first began to look for a
simple (that part is important) software on the internet but couldn’t find anything I deemed suitable (either too complex/ not adapted to my needs) so I decided to design my own. I started by looking for a simple C FFT library and stumbled upon KISS FFT, which looked nice. I developed my own code under codeblocks and was doing all the tracing “manually” under Excel. When I got to a working code I decided to develop an interface to it, under Visual C++. I understand it may not be the best option, but I’m not a professional programmer so I didn’t want to spend too much time on it.
I could also have developed under linux but I don’t like Linux
Anyway as this is my own personal work (I developed it entirely at home), I decided I would share, may it be useful for somebody else.
Here are two links:
1 - The software :
https://mega.co.nz/#!Ocl1kTLT!UWJPnSbFlhzuKuqJxD2BpKcpZ5hGxOR6kV5ZEzV6C1Q2 - The english "manual", with screenshots and description of the software :
https://mega.co.nz/#!6VcgHJTT!RGGWD4s1kuatzBRojYJt6ERFU5n0Q0wp9LbMRHlo-68I tested it under XP/7/8 and it works fine.
Let me know what you think