« previous next »
Pages: [1]   Go Down

Author Topic: Latch switch  (Read 1463 times)

0 Members and 1 Guest are viewing this topic.

Offline J4e8a16nTopic starter

  • Regular Contributor
  • *
  • Posts: 222
  • Country: ca
    • Jean Pierre Daviau
Latch switch
« on: April 14, 2014, 02:35:16 pm »
Here is a latch switch circuit  from a EEVblog video.

How can I create a push button contact switch in LTSpice?

I used a voltage pulse but it does not create the effect.

Rename the file to LatchPowerOn-Off.asc to use it.

JP
Logged
Equipment Fluke, PSup..5-30V 3.4A, Owon SDS7102, Victor SGenerator,
Isn't this suppose to be a technical and exact science?
 

Offline J4e8a16nTopic starter

  • Regular Contributor
  • *
  • Posts: 222
  • Country: ca
    • Jean Pierre Daviau
Re: Latch switch
« Reply #1 on: April 15, 2014, 03:58:31 pm »
I tried the csw ... it seems to work.... 

Remove the .txt extension to get the asc LTSpice file.
Logged
Equipment Fluke, PSup..5-30V 3.4A, Owon SDS7102, Victor SGenerator,
Isn't this suppose to be a technical and exact science?
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee