« previous next »
Pages: [1]   Go Down

Author Topic: Latest Project - Outdoorising an Indoor Smoke Machine  (Read 760 times)

0 Members and 1 Guest are viewing this topic.

Offline kolbepTopic starter

  • Frequent Contributor
  • **
  • Posts: 598
  • Country: za
    • ShoutingElectronics.com
Latest Project - Outdoorising an Indoor Smoke Machine
« on: November 10, 2018, 04:06:13 pm »
My latest project (and this one has a deadline of less than a week).
Taking an Indoor Smoke Machine (like you use in a club), This one has an RGB Led Array to light up the fog.
Splitting the Unit into 2 separate parts, automating the firing with an Arduino and Mains Timer,
Sealing it to work outdoors.

Video of the 1st Part is here :


Enjoy, and if you do, please subscribe to my channel so that you can see when I have finished it.

P
Logged
====================================
www.ShoutingElectronics.com Don't just talk about Electronics, SHOUT ABOUT IT! Electronics Blog Site and Youtube Channel
 

Offline kolbepTopic starter

  • Frequent Contributor
  • **
  • Posts: 598
  • Country: za
    • ShoutingElectronics.com
Re: Latest Project - Outdoorising an Indoor Smoke Machine
« Reply #1 on: November 19, 2018, 05:48:18 am »
And Part 2 has just gone up :

https://youtu.be/bNY-nas5nQw
Logged
====================================
www.ShoutingElectronics.com Don't just talk about Electronics, SHOUT ABOUT IT! Electronics Blog Site and Youtube Channel
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee