Author Topic: LCX058AKC + LC98500 - mini 1.4 inch LCD from SONY reverse engineer  (Read 1153 times)

0 Members and 1 Guest are viewing this topic.

Offline Vector101Topic starter

  • Newbie
  • Posts: 2
  • Country: ro
The purpose of this project is to reutilize the LCX058AKC type of mini LCDs that usually are used in digital cameras.

As the project will progress I will update this page with the information I find.

If anybody would like to lend a hand that would be helpful.

The final target is to use a STM32 or ESP to drive the LCD if possible or find an alternative for the custom LC98500.

LCX058AKC - no datasheet - 1.4 inch LCD
LC98500 aka TPG018A - no datasheet SANYO/PANASONIC Custom ASIC - LCD driver usually drives 2 LCDS main camera pannel or EVF


« Last Edit: February 16, 2018, 09:30:49 pm by Vector101 »
 

Offline PhillyGreg

  • Contributor
  • Posts: 14
  • Country: us
Re: LCX058AKC + LC98500 - mini 1.4 inch LCD from SONY reverse engineer
« Reply #1 on: February 17, 2018, 02:28:00 am »
Perhaps, this might be a place to start?
https://www.eevblog.com/forum/projects/drivin'-a-sony-lcd-viewfinder/

Looks like the same part, and the OP attached a datasheet.
No progress made, but the datasheet seems to be complete enough to get it running.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf