LTC4006 stange Mosfet drive signal behavior. Am I missing something basic?

[cwalex]

That board looks sweet! Very nice work. 

[Electr0nicus]

That board looks sweet! Very nice work. 

Thanks!

I can also post the documentation (when finished), if someone wants me to.

Cheers Gregor

[qno]

Hi Gregor,

Good job, thanks for explaining what you all did to come to the satisfacionary results.
Did you do some high temperature tests?
My experience is that wat works at a normal operating temperature of 50°C can go wrong @ 80 or 90°C.

Thanks

[jfmateos]

Hi electronicus,

I have a question about LTC4006... powering the load through the lipo battery (the power adapter is unplugged), does the LTC4006 switch off the power when the battery voltage drops below a configurable level?

It would be nice to look over your project´s documentation.

Congratulations.

[yann4905]

Hi Elect0nicus,

I know this is an old topic, but I'dlike to know if you would eventually share your documentation about your charger?

Best regards.

[albertomaria]

hello, I know it's way far in the time, but do you still have this project in hands? Is there any possibility to share your ressources? Thanks in advance. Alberto

[VitaliyK]

Would it be possible to post or send me your CAD files for LTC4006 board. Hope they are in Eagle format.