Author Topic: New uRuler (Read 48663 times)

TVHeadedRobots · « **Reply #75 on:** October 27, 2014, 09:23:53 pm »

+1 for new uRuler. I'll grab at least 5 as I gave away 3 from the last batch to friends.

Hade · « **Reply #76 on:** October 28, 2014, 11:35:02 am »

Wouldn't mind a couple of these bad boys.

IO390 · « **Reply #77 on:** October 28, 2014, 01:41:12 pm »

I'll take a couple.

tinytim · « **Reply #78 on:** October 28, 2014, 09:09:15 pm »

count me in

g0hjq · « **Reply #79 on:** October 28, 2014, 10:04:52 pm »

Yes please!

I missed out on the last batch.

kcs · « **Reply #80 on:** October 29, 2014, 06:58:01 am »

Maybe some ideas could be incorporated in Dave's ruler. I like the part on the right.

davidf2281 · « **Reply #81 on:** October 30, 2014, 10:01:51 am »

con-f-use · « **Reply #82 on:** October 30, 2014, 10:38:13 am »

Quote from: kcs on October 29, 2014, 06:58:01 am

I like the part on the right.

Me too, I always get N-MOS, P-MOS, NPN and PNP contacts mixed up. Is there a nice menomic for where the drain, source, gate / base, emitter, collector are and where the arrow points. I know of NPN -> "never points in" but nothing that covers it all.

Strada916 · « **Reply #83 on:** October 30, 2014, 10:43:41 am »

Enter the Gate, to find the Source to the Drain.

tautech · « **Reply #84 on:** October 30, 2014, 11:44:59 am »

Quote from: Strada916 on October 30, 2014, 10:43:41 am

Enter the Gate, to find the Source to the Drain.

Nice.
I got this one years ago:
Piss iN Pot.

DutchGert · « **Reply #85 on:** October 30, 2014, 01:43:14 pm »

Quote from: EEVblog on September 13, 2014, 10:36:33 am

This is the new uRuler I gave away at the Electronex show:

Who wants me to do another Pozible campaign?

So when is it coming Dave?

LukeW · « **Reply #86 on:** October 30, 2014, 05:25:40 pm »

Quote from: kcs on October 29, 2014, 06:58:01 am

Maybe some ideas could be incorporated in Dave's ruler. I like the part on the right.

It seems to be a common misconception (which that ruler features) that you can look at the inside of a through-hole LED and identify the cathode as the side that has the big part of the metal leadframe that the LED die is sitting on. Although that is usually the case, it is not always the case - I've seen some batches of LEDs, rarely, where it isn't.

SteveyG · « **Reply #87 on:** October 30, 2014, 09:35:00 pm »

I'd pay double for a non-branded one.

EvilGeniusSkis · « **Reply #88 on:** November 13, 2014, 02:11:02 am »

If you do a crowd funded thing for th uRuler what about making a longer one? say 30cm?

miguelvp · « **Reply #89 on:** November 13, 2014, 02:17:07 am »

Quote from: EvilGeniusSkis on November 13, 2014, 02:11:02 am

If you do a crowd funded thing for th uRuler what about making a longer one? say 30cm?

That has already been answered:
https://www.eevblog.com/forum/projects/new-uruler/msg513099/#msg513099

Reason why not is because it has to fit inside a standard envelop.

EvilGeniusSkis · « **Reply #90 on:** November 14, 2014, 01:26:56 am »

Quote from: miguelvp on November 13, 2014, 02:17:07 am

Quote from: EvilGeniusSkis on November 13, 2014, 02:11:02 am
If you do a crowd funded thing for th uRuler what about making a longer one? say 30cm?

That has already been answered:
https://www.eevblog.com/forum/projects/new-uruler/msg513099/#msg513099

Reason why not is because it has to fit inside a standard envelop.

just put the stamp and address on the ruler, after all if you can mail a coconut...

Postal666 · « **Reply #91 on:** November 14, 2014, 04:18:45 am »

I'd buy another batch, for sure!

LektroiD · « **Reply #92 on:** November 14, 2014, 04:35:41 am »

Quote from: bob808 on September 14, 2014, 05:33:45 am

Since I never got the first version you should do a new&old package

I never got the first version either. A rerun would be cool, as well as the new one. I'd take both.

Dongulus · « **Reply #93 on:** February 11, 2015, 05:44:37 pm »

Is a uRuler batch still in the works?

Maybe a good first assignment whenever you bring your new assistant on board.

eneuro · « **Reply #94 on:** February 11, 2015, 07:50:08 pm »

Waiting for another uRuler gold+black (not green) with EE calculator and built-in energy harvesting device like this

http://www.mide.com/products/volture/piezoelectric-vibration-energy-harvesters.php

Quote

Midé's Volture Piezoelectric Vibration Energy Harvesters convert mechanical vibrational energy into alternating electrical energy (AC). This AC is then electronically converted to DC, which can be used to drive a multitude of wireless applications or recharge a battery.

radiomog · « **Reply #95 on:** February 11, 2015, 08:05:58 pm »

I'm in for one or more, depending on cost/shipping.

tech5940 · « **Reply #96 on:** February 17, 2015, 04:18:27 am »

I'd buy some.

stevedave28 · « **Reply #97 on:** March 29, 2015, 01:28:49 am »

Forgive me if I missed it but I was trying to find somewhere to buy some of these. I'm in the USA.

On another note, love your youtube channel. I watch it all the time. You know your stuff and you make it interesting. Keep up the great work.

SteveD

timofonic · « **Reply #98 on:** August 20, 2015, 06:32:24 am »

What about uruler 3.0?

You could optimize space (smaller logos, for example) and add template symbols

Here's a bunch of examples...

pcbguy1927 · « **Reply #99 on:** September 25, 2015, 04:55:16 pm »

How about making the gerbers available like you did for the last version.


EEVblog Main Site	EEVblog on Youtube	EEVblog on Twitter	EEVblog on Facebook	EEVblog on Odysee

Author Topic: New uRuler (Read 48663 times)

Share me