quick connect terminals

[Simon]

I'm trying to set some stuff up for testing so want to connect things like fans to some sort of quick connect terminal so that they can be moved around etc. I'm sure there is something out there but don't know what to call it. something sprung would be good like speaker terminals but able to take 20A

[AllTheGearNoIdea]

Look at Wago these are original and the best. several manufacturers make something similiar including Wiedmuller

https://uk.rs-online.com/web/p/pcb-terminal-blocks/8919918/

[stj]

20A??
what voltage and what termination on the other side?

[Simon]

20A??
what voltage and what termination on the other side?

24V, I have things like fans with their own plugs, I can use a mating half, cut the plug off.

[Fludo]

https://www.amazon.com/Battery-Connect-Disconnect-Connector-Recovery/dp/B01KHQR0K4/ref=sr_1_4?s=automotive&ie=UTF8&qid=1516649531&sr=1-4&keywords=battery+quick+connect

The battery quick disconnects work fairly well for DC connections, I've seen panel mount types too.

[stj]

these are good - WAGO 221 series.

[David Hess]

I use 0.062" Molex connectors for low currents and Anderson Powerpole connectors for high currents.