Low Cost PCB's Low Cost Components

Author Topic: straight shank .8mm drill bits  (Read 267 times)

0 Members and 1 Guest are viewing this topic.

Offline waytec

  • Newbie
  • Posts: 2
  • Country: au
straight shank .8mm drill bits
« on: September 24, 2017, 09:59:10 AM »
Does anybody know of a source of these drill bits.
Was able to get them off ebay ... but now searches only show them bundled with other sizes...  |O


Wayne
 

Offline BrianHG

  • Super Contributor
  • ***
  • Posts: 1073
  • Country: ca
__________
BrianHG.
 

Offline wilfred

  • Super Contributor
  • ***
  • Posts: 4408
  • Country: au
 

Offline waytec

  • Newbie
  • Posts: 2
  • Country: au
Re: straight shank .8mm drill bits
« Reply #3 on: September 24, 2017, 09:42:53 PM »
Ohh thank you very much...
Thought I had searched everywhere....

Thanks again  :)
 

Online Kleinstein

  • Super Contributor
  • ***
  • Posts: 3320
  • Country: de
Re: straight shank .8mm drill bits
« Reply #4 on: September 25, 2017, 12:29:17 AM »
0.8 mm normal HS drills are not that special. One should get them from regular tools supply for metal working. In my supplier's catalog they are at 1.50 Eur for a pack of 10 (the simple type, thus no TiN, but dark FeN finish).
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf