XLSEMI XL4016 drop in replacement for 4015?

[smile]

Can XL4016 be used as drop in replacement for the 4015?

http://www.xlsemi.com/datasheet/xl4015%20datasheet.pdf
http://www.xlsemi.com/datasheet/xl4016%20datasheet.pdf

Seems like same pinout on both.

[Jacon]

Yes - as long as you use it with same output conditions.
If those change, you should change some other parts (D1, L1, Cout, R's) accordingly...

[smile]

The device is rated as 5A output, but for XL4015 that is the MAX, so I want to change it to XL4016. I can change diode if it's 5A to something like 8A too.

[smile]

There is no way to change the L1 if I don't have a meter to measure what I've got?
Datasheet calls for 47uH 12A??

Would this work https://www.tme.eu/en/details/hci2114-470/smd-power-inductors/ferrocore/

[Jacon]

Sure 

[alexblade]

Hi guys please help me understand

well known 4015/4016 boards from ali, will these boards maintain a stable output voltage (5V) if input not stable (voltage floats 11-14V) ?

if no could you advise some chips/boards with this options (desired 4A w/o heat dissipation)

[sleemanj]

well known 4015/4016 boards from ali, will these boards maintain a stable output voltage (5V) if input not stable (voltage floats 11-14V) ?

Yes

[alexblade]

really?

or for ex:
input 14V, I setup output as 5V
but when input falling to 10V I probably get on output 4V?

[sleemanj]

really?

Yes.

What the input voltage does is not of consequence provided it is within the acceptable input range.