Author Topic: Library Proteus Professional  (Read 4325 times)

0 Members and 1 Guest are viewing this topic.

Offline BimoSora

  • Newbie
  • Posts: 1
  • Country: id
Library Proteus Professional
« on: January 05, 2017, 01:22:44 am »
Where can I find library "proteus professional" of the Internet to be included in the software "proteus professional"?
 

Offline kiran_shrestha

  • Regular Contributor
  • *
  • Posts: 58
  • Country: kr
  • Kiran
    • shorted wire
Re: Library Proteus Professional
« Reply #1 on: January 06, 2017, 11:57:57 am »
OMG Its hard to decode your question... :-//
-------------------------------------------------------------
Thats all
 

Offline ebclr

  • Super Contributor
  • ***
  • Posts: 1628
  • Country: 00
Re: Library Proteus Professional
« Reply #2 on: January 06, 2017, 01:36:23 pm »
 

Online Simon

  • Global Moderator
  • *****
  • Posts: 12006
  • Country: gb
  • Did that just blow up? No? might work after all !!
    • Simon's Electronics
Re: Library Proteus Professional
« Reply #3 on: February 01, 2017, 08:35:54 am »
www.altium.com

That is hardly an answer, the OP really needs to explain what he is on about.
https://www.simonselectronics.co.uk/shop New stock now in of EEVblog Brymen 235 and uCurrent Gold, Now selling a selection of Probe Master probes
 

Offline ebclr

  • Super Contributor
  • ***
  • Posts: 1628
  • Country: 00
Re: Library Proteus Professional
« Reply #4 on: February 01, 2017, 10:18:49 pm »
He is clear, he need libraryes for proteus prefessional, and this can be found at altium, because Proteus professional is the name that Altium has on early days, Just go to altium and find out the download that is there
 

Offline DerekG

  • Frequent Contributor
  • **
  • Posts: 827
  • Country: nf
Re: Library Proteus Professional
« Reply #5 on: March 19, 2017, 12:24:25 am »
Proteus professional is the name that Altium has on early days

The predecessor to Altium was actually Protel ............... and so has no relationship with Proteus.

If the original poster has a legitimate copy of Proteus then he has access to the full Proteus libraries via their website.
I also sat between Elvis & Bigfoot on the UFO.
 

Offline ebclr

  • Super Contributor
  • ***
  • Posts: 1628
  • Country: 00
Re: Library Proteus Professional
« Reply #6 on: March 19, 2017, 07:43:10 pm »
You right I made a fool call

https://www.labcenter.com/

Is the right place

 

Offline prandov

  • Newbie
  • Posts: 3
  • Country: ca
Re: Library Proteus Professional
« Reply #7 on: September 30, 2017, 12:49:12 pm »
There are so many devices missing from proteus, and its not easy to add them.

I wish it was as easy as mechanical design software -if you need a bolt you can just download an STL/SLDPRT/etc. file directly from McMaster carr and use it in your assembly

To add a missing part in proteus I do: 1. Decompose a similar part 2. Add/rename pins 3. MakeDevice and fill in as much as possible.
I exclude from simulation because I've not found an easy way to add the spice info.

Its very frustrating if you have to add more than 1 or 2 "missing" devices to your design

Does anyone have tips to do this better?
 

Online blueskull

  • Supporter
  • ****
  • Posts: 10047
  • Country: cn
  • Power Electronics Guy
Re: Library Proteus Professional
« Reply #8 on: September 30, 2017, 12:59:49 pm »
Altium has much better library support, yet I still manually draw every package for each project. When you do this so many times, it becomes much faster, and using your own library gives you much better control of your design.
SIGSEGV is inevitable if you try to talk more than you know. If I say gibberish, keep in mind that my license plate is SIGSEGV.
 

Online Simon

  • Global Moderator
  • *****
  • Posts: 12006
  • Country: gb
  • Did that just blow up? No? might work after all !!
    • Simon's Electronics
Re: Library Proteus Professional
« Reply #9 on: October 02, 2017, 02:36:50 am »
I think most programs won't have the parts YOU want. I never find the parts i want. Altiums circuit studio comes full of promises with their "vault" that is a vacuous name for an equally vacuous  function, it has nothing of any use, you want a resistor, you look up the resistor section and find 1! resistor, same with other parts, yes they have some of the samtec headers, strangely just not the one i need, So I also end up rolling all of my own and for the first project it's a royal pain. As creating parts these days includes adding 3D models essential particularly for things like connectors it is a long procedure. Nothing in proteus really made sense to me and the manual never really helped, not that the circuit studio one is any better.
https://www.simonselectronics.co.uk/shop New stock now in of EEVblog Brymen 235 and uCurrent Gold, Now selling a selection of Probe Master probes
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf