21
Beginners / Re: Bulk input caps and impedance
« Last post by selcuk on Today at 11:02:35 am »You may use inrush current limiters for this purpose instead of a regular resistor. That is either a NTC or ferrite. They have ratings for inrush currents in their datasheets.
If you want to use a resistor, there are "Pulse Withstanding" resistors on the market. These have inrush current ratings in their datasheets as well. An inductor will probably help but you need to check the DC resistance.
If you want to use a resistor, there are "Pulse Withstanding" resistors on the market. These have inrush current ratings in their datasheets as well. An inductor will probably help but you need to check the DC resistance.