Author Topic: Agilent DSO6054A noise on two channels  (Read 5098 times)

0 Members and 1 Guest are viewing this topic.

Offline Carrington

  • Super Contributor
  • ***
  • Posts: 1152
  • Country: es
Re: Agilent DSO6054A noise on two channels
« Reply #25 on: July 14, 2016, 06:50:52 pm »
Today I repeated (several times) all the measurements, especially for the inductance with a DCR of 0.71OHM.
My LCR almost every time read around 100nH, but occasionally it read value between 10nH and 15nH, it certainly has to do with the SMD tweezers.

The problem was my LCR meter. Thanks to the "jaxbird" impedance analyzer, I was able to measure its value.

http://www.eevblog.com/forum/projects/impedance-analyzer-build-and-experiments/msg950860/#msg950860
My English can be pretty bad, so suggestions are welcome. ;)
Space Weather.
Lightning & Thunderstorms in Real Time.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf