Author Topic: Agilent U1232A problem - beeper almost silent  (Read 804 times)

0 Members and 1 Guest are viewing this topic.

Offline mark41Topic starter

  • Contributor
  • Posts: 15
  • Country: cz
Agilent U1232A problem - beeper almost silent
« on: August 26, 2017, 12:32:21 pm »
I've got this issue on the U1232A Agilent multimeter. The sound of the beeper is almost silent. I tried to change the piezo element with a new piece but it is still the same. Later I connected the beeper terminals to the oscilloscope. The screenshots are from the Power-On sound melody - with piezo speaker connected and without speaker connected. Probably something went wrong on the PCB, but I need a clue where to start. Thank you very much.
Mark
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf