Author Topic: Beckman RMS3030 zebra strips  (Read 1050 times)

0 Members and 1 Guest are viewing this topic.

Offline stillcuriousTopic starter

  • Newbie
  • Posts: 2
  • Country: us
Beckman RMS3030 zebra strips
« on: December 16, 2017, 04:25:44 pm »
  :-[ Help! I am new to this blog. I have a Beckman RMS3030 mm that is in need of main processor zebra strips (elastomeric connectors).  I don't know if I lost them recently or years ago.  As I am unfamiliar with these devices I am hoping someone who visits this blog can help me find new or used replacements.  I have attached a jpg from mrmodemhead's website that shows the zebra strips for the main processor board in addition to the processor board mount in which the strips are inserted.

Any advice is appreciated.

 

Offline ivi_yak

  • Regular Contributor
  • *
  • Posts: 76
  • Country: 00
eevblog
 
The following users thanked this post: stillcurious

Offline stillcuriousTopic starter

  • Newbie
  • Posts: 2
  • Country: us
Re: Beckman RMS3030 zebra strips
« Reply #2 on: December 22, 2017, 09:09:01 pm »
 :-\ thanks but suggestion not cost effective.  ordered some used segments from ebay seller in Poland that will require modification of both the mount and the elastomeric segment. the cost of the segments is less than ten dollars.  the segments should arrive some time in January.  thanks for looking.

Stillcurious
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf