Author Topic: Bricked My Rigol DS2072A-S -- FIXED!  (Read 1371 times)

0 Members and 1 Guest are viewing this topic.

Offline Melt-O-TronicTopic starter

  • Frequent Contributor
  • **
  • Posts: 259
  • Country: us
  • Brilliant with a slaughtering iron in my hand!
Bricked My Rigol DS2072A-S -- FIXED!
« on: July 08, 2018, 02:18:35 pm »
 :palm:  Well I've finally done it.  I tried to do a firmware upgrade last night to fix a bug (going from v00.03.03.01.00 to v00.03.05.03.03).  The progress bar stopped moving at around 10% within a minute or two and didn't move for the next 2 hours.  I managed to convince myself that it was probably just decompressing and hadn't gotten to the point of no return, so I eventually power cycled it.  Stupid move.

Now, the splash screen comes up and it goes into a perpetual reboot cycle about every 3 seconds.  I have a memory dump file I did via SCPI command about 3 years ago in preparation for Riglol.  Is there any chance I can shove that back in with a hardware programmer?  Or am I going to have to bite the bullet and beg Rigol for help?

 |O
« Last Edit: July 08, 2018, 09:45:08 pm by Melt-O-Tronic »
 

Offline Samogon

  • Frequent Contributor
  • **
  • Posts: 457
  • Country: us
Re: Bricked My Rigol DS2072A-S
« Reply #1 on: July 08, 2018, 04:55:49 pm »
So power button + help button trick is not working to go to FW update mode?
 
The following users thanked this post: Melt-O-Tronic, sokoloff

Offline Melt-O-TronicTopic starter

  • Frequent Contributor
  • **
  • Posts: 259
  • Country: us
  • Brilliant with a slaughtering iron in my hand!
Re: Bricked My Rigol DS2072A-S
« Reply #2 on: July 08, 2018, 09:44:28 pm »
OMG, Samogon.  I've read soooo many DS2072 posts and totally missed that.  I did it and my scope is back AND the firmware update is successful.

THANK YOU!!!   :-+   :-+   :-+




https://www.eevblog.com/forum/testgear/unlockinghacking-the-rigol-ds2000a-series-scope-the-short-post/
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf