Can anyone identify these connectors?

[urbis]

I've just bought a folding camper with a Sargent PSU2005 distribution board.

The wiring is already there, but there's a couple of 12v fuses that aren't used and I'd like to wire them up.

This is the "connector kit" which I already have, but I need to populate some other terminals on the 12 way connector.

https://sargentltd.co.uk/shop/product/psu_2005_connecting_kit/178

By the looks of things, it's the female pins that go into there (male on the PSU side).

For reference, if it matters, the pin outs are below:

http://www.swift-owners-club.com/support/oem-handbooks/sargent/PSU-2005-User-Instructions.pdf

Thanks!

[coromonadalix]

it says on the web page JST - L series of connector  you can easily find some reference

[urbis]

I saw that, but struggling to find that exact one

[drussell]

What physical size are they?  You should be able to tell what series they are by carefully measuring the pin pitch, etc. 

Are they the same size as a PC ATX style power supply?  I would think they would be much larger since that style is only good for about 5A per contact.  I am assuming your application would need 15 or 20A capability on each contact of the connector.

Perhaps they are something like the VL series, which are 6.2mm pitch and rated for 20A per contact?

http://www.jst-mfg.com/product/pdf/eng/eVL1.pdf