Crimp box format socket to fit 0.05" (1.27mm) square PCB pin

[perdrix]

I initially thought this would a a simple item to find, but it seems it's a bit harder than that.

The chopper PCB in the HP 3420 has two 0.05" square PCB pins to which I need to connect two wires - so easy?

No - I've so far been unable to locate a free crimp socket to fit a 1/20" square pin.

Any suggestions most welcome

Thanks
Dave

[pamphonica]

This series is 0.045" square and might provide a basis for experiment.
http://www.molex.com/molex/products/datasheet.jsp?part=active/0009503021_CRIMP_HOUSINGS.xml#partdetail
Jeremy