Diagram needed

[sidspop]

Connections diagram for a Kenwood KAC-901 car amp. just the connections.
There appears to be precisely nothing on the internet to do with how it is connected.
Thanks

[PA0PBZ]

Here you can download the schematic, that should help: https://elektrotanya.com/kenwood_kac-901_amplifier_sch.pdf/download.html

[Bratster]

Edit: got ninja'd [emoji14]


Here's a link to a PDF of the schematic:

https://elektrotanya.com/kenwood_kac-901_amplifier_sch.pdf/download.html

Didn't see anything for installation in a quick Google search but it may be out there.

Sent from my Nexus 6 using Tapatalk

[sidspop]

already got that diagram, but it's a very poor scan of a photocopy. when blown up the definition (what there is) dissappears

[PA0PBZ]

already got that diagram, but it's a very poor scan of a photocopy. when blown up the definition (what there is) dissappears

I'm not sure what you have been looking at, but the scan is of very good quality and it is easy to see where the connections are.

[coromonadalix]

https://www.amp-performance.de/518-Kenwood-KAC-901.html    for photos

i had one of theses in the past,  normally you would connect the din  for left an right and the remote power up pins, you have din to rca plug converters too,  and in one photo you see the output plug with the power pins ...

[Bratster]

already got that diagram, but it's a very poor scan of a photocopy. when blown up the definition (what there is) dissappears

Did you actually download the PDF file from linked webpage?

I had no problem zooming in on it and seeing everything just fine.

 The image on the page however is just low resolution

Sent from my Nexus 6 using Tapatalk