I have a Keithley 2701 Ethernet multimeter/data acquisition system with firmware version B0x which was working okay. I downloaded the Keithley FlashWizard32 C12 and 2701 firmware D05 package from Tektronix website. The FlashWizard32 found the 2701 on the Ethernet without problem and the updating process completed without error. However the 2701 unit restarts with 'FPGA TIMEOUT' on the screen. At this point the unit is still able to flash through the RS-232, which I did. The updating took about 7 minutes and the result is the same.
I'm wondering if anyone tried the 2701 firmware D05 package from Tektronix website with success. The FlashWizard32 will not allow downgrade (perhaps with a secret command line switch it would), and the only old firmware I can find is the A05/A06 on XDEV (TiN's site).