HM303-6 service manual needed

[phil]

Hi,

I have a repair request for a HM303-6 scope. However, I could not find any schematics or a service manual. There is a SM for the HM303-5, but there have been huge changes between 303-5 and 303-6.

What I know about the scope is that the previous owner forgot to discharge a cap and killed the component tester that way. The X-deflection is damaged, there is no sweep and the beam (now a dot) is shifted to the left by about 5 divs.
I could check the X-amp but now I reached the limit of what I can do with the old 303-5 schematics.

Does anyone here have schematics for the 303-6?

Thanks,
phil

[Simon123]

There was another thread asking about schematic.
Someone mentioned this link in it http://www.hameg.com/service_main.0.html?&L=0

You could also try contacting Rhode and Schwartz, cause old hameg is now R&S as far as i know.

[Fraser]

Just contact Hameg. They will happily supply the schematic. I have received such on many occasions.

Aurora