Found some old threads on this subject, rather than resurrecting Ill start a new one. Picked up a 53132A from eBay, included factory installed options 010 and 030 and was a later serial number (for HP branding at least). The eBay photos looked a bit rough, it was not clear if the display was week or if it was just washed out by the flash. The case was re-painted and a bit rough but the price was right IF it was in working order and the OEM options where installed.
I lucked out and the display was in very good shape, nice and bright with a blueish tint. The meter cleaned out well but the re-painted case is a bit of an eye sore yet. Found it did indeed included the OEM options 010 and 030 and everything seems to work well, except for a noisy fan. Not just normal fan noise, its rough and sounds like a bearing is failing. Replaced with a Sunon 5.5 CFM 12.8 dbA fan, much better.
Sunon replacement fan from Digikey;
https://www.digikey.com/product-detail/en/sunon-fans/HA40201V4-000U-999/259-1617-ND/3694184Original fan;
Fan replaced;