« previous next »
Pages: [1]   Go Down

Author Topic: Hp1741a oscilliscope push lever  (Read 2758 times)

0 Members and 1 Guest are viewing this topic.

Offline ApplemacTopic starter

  • Regular Contributor
  • *
  • Posts: 53
  • Country: es
Hp1741a oscilliscope push lever
« on: December 10, 2015, 09:45:38 pm »
Hi was wondering if anyone knew where I could get a replacement lever for the 10x magnification switch. Whilst I was repairing the oscilliscope the lever snapped.
Logged
 

Offline tautech

  • Super Contributor
  • ***
  • Posts: 28377
  • Country: nz
  • Taupaki Technologies Ltd. Siglent Distributor NZ.
    • Taupaki Technologies Ltd.
Re: Hp1741a oscilliscope push lever
« Reply #1 on: December 10, 2015, 09:52:26 pm »
Logged
Avid Rabid Hobbyist
Siglent Youtube channel: https://www.youtube.com/@SiglentVideo/videos
 

Offline ApplemacTopic starter

  • Regular Contributor
  • *
  • Posts: 53
  • Country: es
Re: Hp1741a oscilliscope push lever
« Reply #2 on: December 11, 2015, 08:35:54 am »
Ive tried their site but they do not have any.
Logged
 

Offline tautech

  • Super Contributor
  • ***
  • Posts: 28377
  • Country: nz
  • Taupaki Technologies Ltd. Siglent Distributor NZ.
    • Taupaki Technologies Ltd.
Re: Hp1741a oscilliscope push lever
« Reply #3 on: December 11, 2015, 08:41:12 am »
Quote from: Applemac on December 11, 2015, 08:35:54 am
Ive tried their site but they do not have any.
2 ideas.
Email Sphere.
Place a wanted add in the forum:
https://www.eevblog.com/forum/buysellwanted/
Don't forget to list the part # and/or add a photo.

Surely someone will have a parts unit lying around.
Logged
Avid Rabid Hobbyist
Siglent Youtube channel: https://www.youtube.com/@SiglentVideo/videos
 

Offline DmitryL

  • Regular Contributor
  • *
  • Posts: 242
  • Country: gb
Re: Hp1741a oscilliscope push lever
« Reply #4 on: December 11, 2015, 12:10:48 pm »
Quote from: Applemac on December 10, 2015, 09:45:38 pm
Hi was wondering if anyone knew where I could get a replacement lever for the 10x magnification switch. Whilst I was repairing the oscilliscope the lever snapped.

I have got a half-dead HP1740 scope. Fixed it until I realised that half of the analog ASIC is dead. It's pretty useless with one channel, so, probably, I can sacrifice it to source spare parts if someone is interested.
Logged
 

Offline Gixy

  • Regular Contributor
  • *
  • Posts: 232
  • Country: fr
Re: Hp1741a oscilliscope push lever
« Reply #5 on: December 11, 2015, 02:05:30 pm »
Logged
 

Offline ApplemacTopic starter

  • Regular Contributor
  • *
  • Posts: 53
  • Country: es
Re: Hp1741a oscilliscope push lever
« Reply #6 on: December 12, 2015, 09:31:36 pm »
DmitryL,

If you could I would be very greatful for the part im looking for.
Logged
 

Offline TAMHAN

  • Frequent Contributor
  • **
  • Posts: 407
  • Country: sk
Re: Hp1741a oscilliscope push lever
« Reply #7 on: December 12, 2015, 10:11:32 pm »
Hello,
I need someone to nag me into firing up that 3D printer.

So, if the spares deal doesnt work out, feel free to go Catalan against my mailbox (tamhan AEHT tamoggemon BALL com). It might take a few emails, as I havent commissioned that printer for one year (bought, built, but never, until today, printed a single item)...
Logged
Feel like some additional tamile wisdom? Visit my YouTube channel -> https://www.youtube.com/user/MrTamhan for 10min tid-bits!
 

Offline ApplemacTopic starter

  • Regular Contributor
  • *
  • Posts: 53
  • Country: es
Re: Hp1741a oscilliscope push lever
« Reply #8 on: December 13, 2015, 09:03:35 pm »
Quote from: Gixy on December 11, 2015, 02:05:30 pm
http://Qservice.tv

10x magnification switch? Isn't it 5x?
http://www.amplifier.cd/Test_Equipment/Hewlett_Packard/HP_other/images/1741A.jpg

No it 10x if you look st the blue push buttons to the right of the screen of the oscilliscope your see one marked 10x. When you push it in a switch is moved via a plastic lever that connects the push botton to the switch on a pcb. Its this part that connects the push button to the switch that broke in mine.
Logged
 

Offline TAMHAN

  • Frequent Contributor
  • **
  • Posts: 407
  • Country: sk
Re: Hp1741a oscilliscope push lever
« Reply #9 on: December 14, 2015, 05:00:34 pm »
Show me a pic, maybe I can print it.
Logged
Feel like some additional tamile wisdom? Visit my YouTube channel -> https://www.youtube.com/user/MrTamhan for 10min tid-bits!
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee