« previous next »
Pages: [1]   Go Down

Author Topic: Identifying 24 Way PCB Header on Repair  (Read 1373 times)

0 Members and 1 Guest are viewing this topic.

Offline bookabooTopic starter

  • Frequent Contributor
  • **
  • Posts: 727
  • Country: ie
Identifying 24 Way PCB Header on Repair
« on: May 05, 2017, 10:05:30 am »
Hi,

I have a PCB with a damaged connector identical to the one in the photos attached.
Does anyone have any ideas as to the manufacturer or product range I should be searching for? It's from an old 1990s era Houchin generator.
Logged
 

Offline BreakingOhmsLaw

  • Frequent Contributor
  • **
  • Posts: 357
  • Country: de
  • Certified solder fume addict
Re: Identifying 24 Way PCB Header on Repair
« Reply #1 on: May 05, 2017, 03:01:05 pm »
Can't really tell the spacing from the picture, but i suggest you measure the exact pin distance and gauge with a caliper.
If it's a clean millimeter value, instead of 2/10 inch, then you can at least rule out US/UK manufacturers and narrow your search on european brands.



« Last Edit: May 05, 2017, 03:14:55 pm by BreakingOhmsLaw »
Logged
 

Offline Monkeh

  • Super Contributor
  • ***
  • Posts: 7992
  • Country: gb
Re: Identifying 24 Way PCB Header on Repair
« Reply #2 on: May 05, 2017, 04:20:28 pm »
Logged
 
The following users thanked this post: bookaboo

Offline bookabooTopic starter

  • Frequent Contributor
  • **
  • Posts: 727
  • Country: ie
Re: Identifying 24 Way PCB Header on Repair
« Reply #3 on: May 05, 2017, 05:45:30 pm »
Thanks, that's saved me hours probably!!!  :)
Logged
 

Offline Monkeh

  • Super Contributor
  • ***
  • Posts: 7992
  • Country: gb
Re: Identifying 24 Way PCB Header on Repair
« Reply #4 on: May 05, 2017, 05:52:55 pm »
It took about 2 minutes to find :P
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee