Author Topic: Kenwood CS-5130 scope trace intesity issue  (Read 1042 times)

0 Members and 1 Guest are viewing this topic.

Offline AutronicTopic starter

  • Newbie
  • Posts: 9
  • Country: au
Kenwood CS-5130 scope trace intesity issue
« on: February 19, 2018, 11:42:28 pm »
Hi,

Recently purchased a Kenwood CS-5130 sope that has a trace intensity issue. At cold power-up the trace intensity is very high. As the unit warms up the trace intensity will decrease, and the intensity knob needs to be turned to maintain a visible trace. Warm trace intesity is OK, but there is very little rotation left on the knob to increase the intensity.

Otherwise the scope functions fine, and has some excellent features.

A service manual, or any other assistance resolving this issue would be appreciated.

Regards, Chris
 

Online tautech

  • Super Contributor
  • ***
  • Posts: 28143
  • Country: nz
  • Taupaki Technologies Ltd. Siglent Distributor NZ.
    • Taupaki Technologies Ltd.
Avid Rabid Hobbyist
Siglent Youtube channel: https://www.youtube.com/@SiglentVideo/videos
 

Offline AutronicTopic starter

  • Newbie
  • Posts: 9
  • Country: au
Re: Kenwood CS-5130 scope trace intesity issue
« Reply #2 on: February 22, 2018, 11:21:08 am »
Thanks for the reply, I will look at those links.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf