LG42LD750 Smart TV

[EMUD]

Hi,
our LG TV has a problem with the mainboard. There are often white lines on the screen when the device is started.
I have checked with spray and discovered, that the problem is very strong when cooling the processor (LGE3556C) or when pressing it with my fingers.
This is a BGA, has anyone tried to replace or to reball and resolder it? And, did it work?
The mainboard EBU60844952 of my LG is obsolete, and so I failed in buying a new or even a used one.
Do you think there is a real chance to get it work again?

EMUD

[Rasz]

might be rohs solder cracking/whiskers, might be chip itself
wont hurt to reflow this chip (without reballing), jam flux around the chip, put board on preheater, wait till it gets up to ~150 and heat that chip until it floats

another ghetto option is
http://www.banggood.com/Universal-LCD-TV-Controller-Board-VGAHDMIAVTVUSB-Interface-p-936100.html

[arekm]

Better V59 which adds usb media support in some form and doesn't cost much more:
http://www.banggood.com/V59-Universal-LCD-Controller-Driver-Board-PCVGAHDMITVUSB-Interface-p-955022.html

[wraper]

I can reflow it (without removing IC) for free on IR station if you pay shipping both ways. Don't guarantee anything though. Shipping back is 6.50 Eur for items below 1 Kg if any interest.