« previous next »
Pages: [1]   Go Down

Author Topic: Marconi Sig gen that wont start up  (Read 1328 times)

0 Members and 1 Guest are viewing this topic.

Offline Nemo1956Topic starter

  • Contributor
  • Posts: 26
  • Country: th
Marconi Sig gen that wont start up
« on: November 21, 2016, 07:52:30 am »
My marconi 2202 siggen will not go past the start up. all the LED's will come on and the fan will run but now that's all it will do. I have had a look inside but can see any loss cables or connectors. All the voltages are correct as well.
I have no idea where to start looking for this fault. :(
Logged
 

Offline PA0PBZ

  • Super Contributor
  • ***
  • Posts: 5127
  • Country: nl
Re: Marconi Sig gen that wont start up
« Reply #1 on: November 21, 2016, 10:45:33 am »
Start with the processor.
Does it get the correct voltage?
Is the clock oscillator running?
Is the reset line the proper level?
Is there activity on the address and data lines?

Logged
Keyboard error: Press F1 to continue.
 

Offline Nemo1956Topic starter

  • Contributor
  • Posts: 26
  • Country: th
Re: Marconi Sig gen that wont start up
« Reply #2 on: November 22, 2016, 08:43:04 am »
I have measured the voltages and that are all fine.
Do you know where I can obtain the circuit for this unit?

Logged
 

Offline PA0PBZ

  • Super Contributor
  • ***
  • Posts: 5127
  • Country: nl
Re: Marconi Sig gen that wont start up
« Reply #3 on: November 22, 2016, 08:45:31 am »
Logged
Keyboard error: Press F1 to continue.
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee