« previous next »
Pages: [1]   Go Down

Author Topic: Marconi Spectrum Analyser TF2370  (Read 2271 times)

0 Members and 1 Guest are viewing this topic.

Offline gergardTopic starter

  • Newbie
  • Posts: 8
  • Country: it
Marconi Spectrum Analyser TF2370
« on: April 18, 2017, 02:55:36 pm »
I have a spectrum analyzer Marconi TF2370 not working, power on is ok, but it certainly has some problems, there are known faults in the power supply?
Logged
 

Online Andy Watson

  • Super Contributor
  • ***
  • Posts: 2085
Re: Marconi Spectrum Analyser TF2370
« Reply #1 on: April 18, 2017, 03:57:59 pm »
Logged
 

Offline gergardTopic starter

  • Newbie
  • Posts: 8
  • Country: it
Re: Marconi Spectrum Analyser TF2370
« Reply #2 on: April 18, 2017, 05:29:30 pm »
No, thanks for the information
Logged
 

Offline gergardTopic starter

  • Newbie
  • Posts: 8
  • Country: it
Re: Marconi Spectrum Analyser TF2370
« Reply #3 on: April 19, 2017, 01:45:00 pm »
The defect is, graticule ok, line present, noise none, scan locked, output square vawe 10MHz (25) is present, amplitude1,5Vrms, counter is on but locked at 04800000.0
If I connect 10MHz out (25) to the input (24), set sweep in manual mode and move bright line position, I see something.
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee